LAY-FLAT HOSES CONTACT [email protected] A Michelin Group Company Nordre Banegate 26 4515, Mandal, Norway A durable lightweight hose for all-round use within mining, energy and agricultural sector. Easy handling and a long life time makes it very cost effective. Available in lengths up to 800 m depending on diameter. Typical application areas are dewatering of open pit mines, irrigation and bypass line for sewage or slurry. FEATURES Full diameter recovery after pressure release. Excellent hydrolysis and fungus resistance. Resistance to a wide range of chemicals. Temperature range -50 to 75 °C (pure water) Excellent UV, Ozone and weathering resistance. Leak proof tested section lengths up to 200 mts. DESIGN Thermoplastic polyether based polyurethane (TPU) Extrusion through a circular woven jacket Excellent adhesion between cover and weave ADVANTAGES Excellent hydrolysis and fungus resistance High diameter and extension stability Resistance to a wide range of chemicals (Ref. chemical list) Temperature range -50 to 75 ° C (pure water) Excellent UV and weathering resistance. Longer length (> 200m) on request for diameter up to 6 inches. TECHNICAL DATA INTERNAL DIAMETER WALL THICKNESS WEIGHT BURST PRESSURE TENSILE STRENGTH NOTE: Safety BP/WP is 2:1 (50%). For all non-hazard and/or non-flammable liquids. ISSUE 2.0 - 18.09.2020 While we have made every attempt to ensure that the information contained in this brochure is accurate, Mandals is not responsible for any errors or omissions, or for the results obtained from the use of this information. Mandals reserves the right to modify any specifications without prior notice to meet or exceed changing standards. For special diameters, features and construction characteristics please contact us at [email protected]