SUBSOILERS-RANGE
16Pages

Subsoiler Range SUBSOILER RANGE

MASCHIO SUBSOILERS MASCHIO GASPARDO offers a complete, high-quality range of subsoilers that can satisfy any customer. Our subsoilers are available with working widths ranging from 130 to 700 cm, both fixed and folding. The smaller versions are ideal for low-power (50 hp) tractors (even for orchards), while the larger models are perfect for tractors with high power (up to 600 hp). Higher working speed than ploughing Good incorporation of the crop residue Decompaction and aeration of the soil Less erosion and loss of land Facilitates water infiltration Breaks up the compacted layer just...

ATTILA AND ATTILA HYDRO 8 ARTIGLIO AND ARTIGLIO HYDRO 10 ARTIGLIO MAGNUM AND PIEGHEVOLE 12

EFFICIENT AND BENEFICIAL LESS POOLING AND MORE SAVINGS Breaking up the soil allows greater percolation of the water towards the deeper layers (with consequent reduction of water pooling) and an improvement of all the physical properties of the soil (in particular its porosity). Thanks to the particular slant of the shanks, it is possible to decrease tensile stress during work, drastically reducing diesel consumption. SUBSOILING • Better development of the basal part • Deeper roots • Greater productivity • Better product quality NO MORE COMPACT SOIL Working 40 to 70 cm deep, the MASCHIO...

In addition to perfectly breaking up the deep, compacted layer of soil, the blades allow for an optimal decompaction of the ground in general and the reconstitution of the porosity in all the worked soil, while maintaining a large part of the crop residue on the surface (about 40%), thus protecting the plot against the erosive effect of rain and wind. In the presence of stones it is possible to use the new WIDIA blades that guarantee an increase in durability of about seven times compared to standard blades. Clod-breaking blades The central blade, secured with two elastic pins, breaks up...

PINOCCHIO 2 m PINOCCHIO Designed for medium/low-power tractors (50-160 hp). The machine works at a maximum depth of 45 cm and is available in different sizes from 1.3 to 3 m, therefore ideal for small farms or simply for those who do not have high-powered tractors. ORCHARD/VINEYARD VERSION The models with working widths ranging from 1.3 to 2.5 meters are highly valued for their ability to decompact the spaces between the rows in orchards and vineyards with clayey and asphyxiated soils that in general are compacted by the continuous passage of the tractor. This way the soil is ventilated for...

HYDRAULIC ROLLER ADJUSTMENT Upon request, it is possible to have a hydraulic version of the double spike roller, which can be adjusted comfortably from the cab. NOT JUST AN ENTRY LEVEL This subsoiler can mount 3, 5, 7 shanks according to the working width. The shanks have a thickness of 30 mm and a height of 76 cm, qualities that allow PINOCCHIO to work in any condition. The combination of shanks and blades in WIDIA guarantee very high performance. VERSATILITY FOR ALL USES PINOCCHIO mounts a double spike roller that guarantees both a perfect refinement of the previously worked soil and the...

ATTILA from 110 to 200 hp ATTILA HYDRO from 110 to 300 hp ATTILA 3 m ATTILA and ATTILA HYDRO The ideal subsoilers for medium-powered tractors, suitable for small- and medium-sized farms. Both allow working the top 50 cm of soil without any inversion of the layers. PRACTICAL ACCESSORIES The containment guards are simple elements but play a very important role in containing the freshly worked soil, avoiding its lateral transfer. They can be moved hydraulically or mechanically. MAXIMUM RESULTS WITH MINIMUM EFFORT Thanks to their particular angle of penetration, the shanks sink into the ground...

UNSTOPPABLE ATTILA HYDRO can have 5, 6 or 9 shanks with a thickness of 3 cm and a height of 76 cm, which, together with the hydro-pneumatic safety system, allow you to work without any interruption even in soils rich in debris. REVERSIBLE BLADES WITH TUNGSTEN CARBIDE COATING For abrasive soils with limited debris, the new boron steel blades with a 2 mm tungsten carbide layer are recommended. This tungsten coating, standard for mechanical machines, increases the useful life of the element by reducing the abrasive action. The ideal working speed is 8-9 km/h. This allows breaking up large...

ARTIGLIO from 150 to 390 hp ARTIGLIO HYDRO from 150 to 350 hp ARTIGLIO 3 m ARTIGLIO and ARTIGLIO HYDRO Designed to work with medium/high-powered tractors. These subsoilers are available in versions of different widths with solutions from 5 to 11 shanks, for a maximum working depth of 55 cm. A FRAME THAT WILL SURPRISE YOU The structures of all the frames have been redesigned and improved using new materials able to increase their durability. For all models it is possible to choose from the following frames: • CSS - with Welded Supports: the shanks are welded to the frame, making the machine...

HYDRO OFFERS TOP PERFORMANCE In the HYDRO versions a double safety mechanism is provided thanks to the hydropneumatic system and the shear bolts. In fact, if the pressure applied to the shank should be too high to be tolerated by the HYDRO system alone, the shear bolt will snap, thus avoiding possible breakage. It is advisable to set the system pressure to 140 bar, because beyond this threshold the shank rises and, once the obstacle has been overcome, it will rearm, returning to working position. Tractor power Working width Transport width Number of shanks Working depth Weight (hydraulic...

ARTIGLIO MAGNUM from 190 to 400 hp ARTIGLIO PIEGHEVOLE from 230 to 400 hp ARTIGLIO PIEGHEVOLE 5 m ARTIGLIO PIEGHEVOLE Hydraulic closing system for a reduced transport width (2.55 m), it is available with 4 or 5 m working widths, with 9 or 11 shanks respectively. The particularly robust structure allows it to be used with high-powered wheeled or tracked tractors. Thanks to 4 hydraulic cylinders, it can be closed in a few seconds. IT CAN HANDLE ANYTHING Thanks to an 82 cm clearance height, the sturdy 35 mm thick shanks can reach a working depth of 55 cm with excellent results, even with high...