TORO ISOTRONIC
6Pages

TORO ISOTRONIC TORO ISOTRONIC

TORO ISOTRONIC ISOBUS power harrow TRADITION AND INNOVATION TORO ISOTRONIC introduces a new generation of electronically controlled power harrows. Equipped with ISOBUS communication protocol, it represents one of the most important innovations at MASCHIO GASPARDO. Created to meet the needs of high-power tractors’ new generations, it is based on the evolution of the TORO RAPIDO PLUS model, with multiple mechanical, structural and electronic innovations that make it a unique piece of equipment on the market. TORO ISOTRONIC AGRONOMIC BENEFITS • Excellent seedbed preparation • Fast sowing • No...

Secondary hinges Used also for JUMBO, they ensure more robustness and resistance to contrast side wings’ twisting. Gearbox temperature control A sensor cconstantly measures all the gearboxes’ temperature. The value is reported in real time on the Universal Terminal in the cabin. Cardan slippage monitoring A special sensor allows to monitor the slippage of the cardan shafts. An alarm signal displayed on a dedicated screen indicates that slippage has occurred. Absorbed power control A load cell that measures the absorbed power guarantees continuous monitoring of the transmission components....

Technical and electronic innovation Monitoring of cardan positioning Thanks to a special sensor it is possible to check the position of the cardan shaft during closing phase. In the event that position is incorrect, a warning light and a specific indication will appear on the Universal Terminal in the cabin. Air-cooling device for oil gearbox The central gearbox oil uses an innovative cooling system. A gear pump constantly maintains oil in circulation, which working together with the reservoir obtained at the base of the third point hitch, increase the heat exchange surface. New levelling...

Logic ISOBUS System «ISO HARROW» The ISOBUS communication between power harrow and tractor allows to display all the working parameters and the hydraulic handlings through simple interfaces of control monitor. • Absorbed power control • Gearbox temperature monitoring • Hydraulic handling control • Monitoring of cardan positioning • Monitoring of cardan shaft • Slippage • Monitoring of roller misalignment AGRICOLTURE 4.0 The software ISOBUS «ISO HARROW» of TORO ISOTRONIC allows data reception and sending during work phases. The traceability of the data responds to the most modern...

SIMPLIFIED HYDRAULICS Using a single double-effect hydraulic distributor, it is possible to control all the hydraulic movements of the power harrow comfortably from the Universal Terminal. The entire system is electrically driven, managed through the ISOBUS protocol. FUNCTIONAL DESIGN To protect the innovative mechanical and electronic components, TORO ISOTRONIC is equipped with specific covers for the centralised hydraulic system, the ISOBUS control units, the cardan protections and the rear roller. WORKING WIDTH TRANSPORT WIDTH WORKING DEPTH POWER REQUIRED TORO ISOTRONIC * Weight with...