Safety helmet& Bump cap
28Pages

Safety helmet & Bump cap SAFETY PRODUCTS

SAFETY PRODUCTS Tanizawa industrial safety helmets & bump caps are all made in Japan. Strict quality controls are conducted at TANIZAWA's Ibaraki Factory, which supplies safety products not only to Japan but also to customers around the world. Certification of ISO 9001: 2015 (quality management system) The head office of the Tanizawa Seisakusho,Ltd. and the Ibaraki Factory of the Joban Tanizawa Seisakusho,Ltd.(a manufacturing subsidiary) have obtained the quality management system "ISO 9001" certification. Certification of ISO 14001: 2015 (environmental management system) The head office of...

Penetration resistance test Standard testImpact absorption test Impact absorption performance of safety helmets are measured by free-falling a 5kg semi-spherical iron ball or iron disk from a height of 1 m. Resistance against pointed or sharp objects is measured by dropping a conical weight and checking the helmet for any deformations. Withstand voltage test of shell This is a test to measure resistance to electricity. Electrodes are placed inside and outside the shell in water, and the helmet has to withstand a voltage of 20,000V for high voltage models with working voltage of 7,000V or...

OShell The hard,smoothly finished material that provides the general outer form of helmet. It protects the head form direct impact and penetration from flying or falling objects. Holes inside the FRP shell fix the fittings (suspension) in place. ©Fittings (Suspension) The fittings (suspension) are composed of a hammock, a headband, a chin strap etc. These fittings are the parts other than the shock absorbing liner, which are fitted to the inside of the shell in order to soften the impact acting on the head of the wearer. Type J suspension is a fittings with the function of Impact absorption...

Easy Push - release Adjuster Buckle System ©particularly excellent (©excellent ^slight weakness xweak ’•'Electricity conducted through rivet holes Easy Push - release Adjuster EPA allows you to adjust the fit of the helmet with one hand, while it is on your head. OThe headband and chinstrap prevent the helmet from slipping and falling off. OA new, highly breathable material called ‘Mawus™’ provides excellent sweat absorption abilities. O Large ventilation holes in the headband ensure the wearer long-lasting comfort in the workplace. Adjust the size by sliding the strap (3mm...

Innovative helmet harness system IIIIIWUIIVV IIUIII IVl I 411 IV/OvJ vJJT vJ LV/1 ■ I QbType ■ J suspension model —^ Japanese PAT.No 5591984 PAT-P : Thailand, Malaysia, Indonesia, Vietnam, China, Korea The harness system that keep you cool, safe and comfortable. 1.Coolness There are two Japanese safety standards for industrial safety helmets. 1)For protection against flying or dropping objects (Test impact point: only parietal area) 2)For protection in the events of tumbling and falling down (Test impact point: For against flying or dropping objects + previous head, back of the...

SAFETY PRODUCTS 2.Safety Conventional models without the impact absorption liner was only for helmets designed to protect the user from flying or falling objects. The Type J suspension passes the "protection in the events of tumbling and falling down" standard without the impact absorption liner by using a new impact absorption system. As a result of our original test, the Type J suspension model has shock absorption performance equal to or higher than that of conventional models (with impact absorption liner models). ■ Japanese standard / Impact absorption test (For protection in the...

Built-in face shield model ST#162V-SD Full size. Hard coating on the surface (Scratch resistance), anti-fog coating on the inside. Replacement is only possible for shield. O Made from PE, resistant to chemicals O Protect your face from chemical splash O Lightweight model

The following helmets are the authorization passing all products of Standard for Protective Helmets (Ministry of Health, Labour and Welfare of Japan) against flying or ^lll protection in the 4 electrical insulation I ^ events of tumbling WY^ dropping objects and falling down at h|9h voltage Excellent ventilation & wide face shield O It adopts a two-layer structure and has excellent ventilation O A transparent peak and a wide face shield ensure a large field of view. lEEal Material ■ -p^yg layer I Transparent I Rain I Face shield I — q « ABS/PCI structure I peak I guttering I S E I...

SAFETY PRODUCTS Built-in face shield model ©ST#1610VJ-SH Transparent I Rain [Ventilation ■ Face shield peak I guttering I hole I S H ea Standard type with transparent peak Transparent! Face shield peak I S H Made from PC, MP style 0 □ Made from lightweight FRP, MP style Material ■ Face shield ■ — - Light weight Material | Face shield | .

The following helmets are the authorization passing all products of Standard for Protective Helmets (Ministry of Health, Labour and Welfare of Japan) ! protection in the events of tumbling and falling down Made from lightweight FRP, Full brim type Made from PC, Short peak type Light weight ecu Rain I Face shield guttering I S H Crubo.For disaster prevention & portable use The upper part rotates, and the height becomes half (80mm) By changing the attachment position of the headband, wide adjustment A : 47-53cm Nonwoven fabric storage bag ST#130-EZ Crubo Japanese PAT. No.5908929 / PAT.P :...

The ST#141 series boasting a sleek and functional form. There are plenty of color variations. Transparent peak secures clear & wide visibility. This is useful for work that requires the user to look up or for working in areas with low ceiling height. It also cuts ultraviolet rays to protect the user's eyes. © ST#161-JZV© ST#141-JZV EPA HOB Transparent peak & rain guttering, with ventilation holesLarge shell type with transparent peak © ST#1610-JZV ST#161L-CZV Transparent peak Standard type with peak & ventilation holes o© HOB Tataria! i Rain 1 Ventilation I pq«