*myagriexpo

X4M

X4M

Product catalog summary

Overview: This document provides technical specifications for the X4 series tractors, including models X4.20, X4.30, X4.35, and X4.40. It covers engine details, transmission, power take-off, axle, brakes, hydraulic power lift, driving seat, dimensions, weights, and optional equipment.

Engine Specifications: The tractors are equipped with DEUTZ and PERKINS engines, offering maximum power ranging from 64 to 76 HP. All engines have a rated speed of 2200 RPM and feature water cooling and dry air filters. The fuel tank capacity is consistent at 75 liters across all models.

Transmission: The tractors feature a Synchro Shuttle transmission with options for 16 forward and 16 reverse gears, or 12 forward and 12 reverse gears, with speeds up to 40 km/h. A mechanical rear diff-lock is standard.

Power Take-Off (PTO): Options include mechanical engagement with one or two speeds (540/1000 RPM), and ground speed PTO is standard.

Axle and Brakes: The front 4WD axle includes electrohydraulic engagement and a limited slip differential lock. The braking system features hydrostatic control with hydraulic piston ring rear brakes and automatic 4WD engagement on braking.

Hydraulic Power Lift: The tractors offer a standard lift capacity of 2700 kg, extendable to 3400 kg with assist cylinders. The hydraulic flow is 45 + 20 L/min, and the three-point linkage is Category 2.

Driving Seat and Controls: Features include an ISO-mounted platform, sprung seat, adjustable steering wheel, and analog instruments. A rear 2-post safety frame is standard.

Dimensions and Weights: All models have a wheelbase of 2164 mm, a minimum width of 1650 mm, and a total weight of 2800 kg without ballast. The height to the ROPS is 2500 mm.

Optional Equipment: Various tire options are available, along with front weights of 36 kg each.

Catalog excerpts

X4m ENGLISH FRANÇAIS ESPAÑOL

Open the catalog to page 1

MAX POWER ISO HP/KW RATED ENGINE POWER (ISO RATING) HP/KW RATED SPEED RPM MAX TORQUE NM MAX TORQUE SPEED RPM BORE/STROKE MM DISPLACEMENT / NO. OF CYLINDERS CM3 COMPRESSION RATIO WATER COOLING AIR FILTER FUEL TANK CAPACITY LT CLUTCH DOUBLE-PLATE DRY CLUTCH IN. (MM) MECHANICALLY OPERATED TRANSMISSION SYNCHRO SHUTTLE + SPEED FOUR + CREEPER: 16FWD+16REV (30KM/H) (2WD) SYNCHRO SHUTTLE + SPEED FOUR: 12FWD+12REV (40 KM/H) SYNCHRO SHUTTLE + SPEED FOUR + CREEPER: 16FWD+16REV (40 KM/H) MECHANICAL REAR DIFF-LOCK POWER TAKE-OFF MECHANICAL ENGAGEMENT 1 SPEED (540 RPM) 2 SPEEDS (540/1000 RPM) 2 SPEEDS (540/540E...

Open the catalog to page 2

PUISSANCE MAXIMUM ISO CH/KW PUISSANCE NOMINALE ISO CH/KW RÉGIME NOMINALE TR/MIN COUPLE MAXIMUM NM RÉGIME DE COUPLE MAXIMUM TR/MIN ALÉSAGE/COURSE MM CYLINDRÉE/NOMBRE DE CYLINDRES CM3 RAPPORT DE COMPRESSION REFROIDISSEMENT PAR EAU FILTRE À AIR CONTENANCE RÉSERVOIR À CARBURANT L EMBRAYAGE INDÉPENDANT BIDISQUE À SEC POUCES (MM) 11 (280)  COMMANDE MÉCANIQUE TRANSMISSION INVERS. MÉC. + SPEED FOUR + SUPER-RÉDUCTEUR: 16 AV+16 AR 30KM/H  (VERS. 2RM)  INVERS. MÉC. + SPEED FOUR: 12AV+12AR (40KM/H)  INVERS. MÉC. + SPEED FOUR + SUPER-RÉDUCTEUR: 16 AV+16 AR (40KM/H)  BLOCAGE MÉCANIQUE DU DIFFÉRENTIEL...

Open the catalog to page 3

POTENCIA MÁX. ISO CV/KW POTENCIA NOMINAL ISO CV/KW RÉGIMEN NOMINAL RPM PAR MÁXIMO NM RÉGIMEN DE PAR MÁXIMO RPM DIÁMETRO INT. CILINDRO / CARRERA MM CILINDRADA/N° CILINDROS CM3 RELACIÓN DE COMPRESIÓN REFRIGERACIÓN POR AGUA FILTRO DE AIRE CAPACIDAD DEPÓSITO CARBURANTE LT EMBRAGUE INDEPENDIENTE EN SECO; BIDISCO PULG (MM) ACCIONAMIENTO MECÁNICO TRANSMISIÓN INV. MEC. + SPEED FOUR + SUPERRED.: 16AD+16MA (30 KM/H) (VERS. 2RM) INV. MEC. + SPEED FOUR: 12AD+12MA (40 KM/H) INV. MEC. + SPEED FOUR + SUPERRED.: 16AD+16MA (40 KM/H) BLOQUEO DE DIFERENCIAL TRASERO CON MANDO MECÁNICO TOMA DE FUERZA MANDO MECÁNICO...

Open the catalog to page 4

X4M

X4M

Catalog excerpts

All McCormick USA catalogs and technical brochures