F 5000
22Pages

BALER RANGE

BALER RANGE ver the last decade the McHale range of balers have been operating in over 5 continents in some of the world’s most difficult conditions. McHale balers have developed a reputation for providing high output, excellent reliability, operator comfort and top resale value

Going forward, the F500 range will be replaced by the new F5000 range of balers. The new F5000 range of balers from McHale brings baling to a new level, with better intake capabilities, better chopping options, smoother drop floor operation, superior controls and up to 10% higher density bales. Features like progressive greasing and oiling and the drop floor unblocking system when combined with high specification components, ensures long life, reliability and a machine that is rugged enough to handle the toughest of crops and ground conditio

Higher Density Bales BALER RANGE

M*Hale fsooo 3 models to choose from The F5000 line up consists of 3 models Non-chopper baler 15 knife chopper baler Fully automatic, load sensing, 25 knife chopper baler

2. Split Drive Gear Box The guarding on the F5000 baler range has been designed using a durable twin skin composite, which is able to absorb the daily knocks and scratches these machines inevitably come in contact with. Once the guarding of the machine is opened up, the operator has easy access to the machine components. All machines in the F5000 range are equipped with a split drive gear box, which ensures that power is evenly distributed. The rollers in the bale chamber are driven from the left hand side of the machine, and the pickup and chopper unit are driven from the right hand side...

OUR SPECIFICATION 4. Rotor Design (ii)The feed rotor or chopping unit now boasts a heavy-duty rotor and comb. The rotor on all F5000 machines is welded on both sides for superior strength and on the drive side the rotor is fitted with a double row bearing with a long service life. (i) As crop enters the spiral rotor, pairs of rotating tines feed the crop through the chopping unit. The double tines on the rotor ensure high output, while the spiral layout reduces load peaks as the machine works in heavy swaths. The rotor design encourages a uniform crop flow, which reduces the risk of...

IWLITIBIB BALING

BALER RANGE 3 SIMPLE STEPS TO REMOVING A BLOCKAGE Should a blockage occur, the sound of the slip clutch alerts the operator who can hydraulically lower the floor from the tractor cab. This widens the feed channel and on re-engaging the PTO the blockage can be fed through. The floor can then be reset and baling can resume. When operating the drop floor cycle on the new F5500 and the F5600 balers, the knives and the drop floor now drop together during the unblocking process, giving even more clearance to allow the blockage to be fed through. On the F5500 balers the drop floor is now equipped with...

BALER RANGE (i) F5000 Bale Chamber The density system on the bale chamber of the F5000 baler range is capable of delivering 10% more density than the earlier F500 range. As a result the F5000 series of balers have the ability to deliver harder, better packed and higher density bales. (ii) Bale Chamber Specifications At the heart of this machine is the 1.23 by 1.25 meter bale chamber which is formed by 18 heavy-duty rollers. (iii) Roller Design The rollers are formed from high-grade tubular steel and have heavy-duty 50 mm forged shafts. (iv) Chamber Bearings All roller assemblies utilise high...

BALER RANGE Oiling and Greasing Continious Oiling System The McHale F5400, F5500 and F5600 are all fitted with a continuous oiling system. The CONTINIOUS OILING SYSTEM on the machine is driven off the gearbox and it ensures the following chains, all receive adequate amounts of oil; - Chamber Drive Side Chains - Rotor Drive Chain - Pick Up Drive Chains - Pick Up Cam Track F5500 and F5600 Progressive Greasing The bearings are supported by a PROGRESSIVE GREASING SYSTEM which ensures a MEASURED amount of PRESSURISED grease is forced into the bearings. Through this system, pressurised grease is...

BALER RANGE F5000 Bale Chamber (v) Roller Design & Sealing The roller ends are fitted with high performance self cleaning seals that have a unique reverse-thread sealing system, which hinders the crop from getting into the bearings. As the roller moves in one direction, the thread on the seal moves in the opposite direction, ensuring that any crop that tries to find its way into the bearing is automatically threaded out. The seals prevent the grease around the bearings from becoming contaminated by crop. (vi) Bale Density Adjustment On the F5400 and F5500 balers the chamber pre charge...

BALER RANGE 8. Vario Stretch Net System A new high performance netter has been designed and developed for the F5000 range. The net tension can be simply adjusted on a variable pulley on the right hand side of the machine and a decal displays the various settings that can be achieved using the system, depending on the net quality being used. This netter is very reliable and features: 1. Endless adjustment of tension to ensure optimum net usage and bale shape. 2. Capacity to take rolls of net wrap up to 1300mm. 3. 180-degree wrap around on the rubber feed roller, eliminating any net slippage...

NON CHOPPER BALER The McHale F5400 non-chopper round baler features a star shaped feed rotor to quickly and efficiently move the crop from the pick up into the bale chamber. This maximizes the baler performance and throughput. The F5400 non chopper round baler comes standard with the McHale drop floor unblocking system, 50mm Bearings on the bale chamber, heavy-duty chains and a continuous oiling system. The F5400 is a high output non-chopper baler. The star shaped feed rotor fitted behind the pick up on the F5400 round baler ensures a high capacity flow of grass into the bale chamber. As crop...

STANDARD FEATURES STANDARD FEATURES • 2.1m pick up • Heavy duty feed rotor • Drop floor unblocking system • 18 roller bale chamber • 50 mm bale chamber bearings • 1’-1/4” chain on the bale chamber • Centralised greasing blocks (manual greasing) • High performance vario stretch netter • Continuous oiler system • Wizard control box (4 digit display)