USER’S MANUAL AND SPARE PARTS CATALOGUE PLASTIC MULCH BED LAYER PCMR 120 / 180

Review: A Date: 01/12/2012 Code: 041010032

CONTENTS PAGE 04 • Safety Instructions • Technical Specifications • Technical Features PAGE 10 • Notes • Warranty Term • Spare Parts PAGE 05 • Main Components PAGE 12 • Positioning Roller Assy PAGE 07 • Operating Instructions PAGE 13 • Front Disc Assy-small PAGE 08 • Machine Operation PAGE 14 • Positioning Wheel Group PAGE 15 • Rear Disc Assy-Large PAGE 16 • Support Wheel Assy PAGE 17 • Mulching Shaft Assy

PLASTIC MULCH BED LAYER SAFETY INSTRUCTIONS • Carefully read all instructions and get familiar with all information herein contained; • Do not allow untrained people to operate the equipment, as accidents may happen; • Do not make any adjustment in the equipment while it is operating or in transit; • In rough terrain, hills or slopes, operate the equipment at a proper speed; • While the equipment is being transported, be careful with the width of the implement in narrow passageways. • Always check if the equipment is in good conditions; • Do not transport people or objects over the implement;...

MAIN COMPONENTES FRONT/REAR DISC - Mounted on a bearing-type flange with shielded bearing; - Tempered Disc; - Disc cleaner; - Height Adjustment. POSITIONING TUBE - Mounted and supported at the ends in bearings. POSITIONING WHEELS - Tires, tubes and rims mounted on tempered shaft; - Shaft-guided pressure springs; - With height and pressure adjustment. MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

MAIN COMPONENTS ADJUSTING WHEELS - Tires, tubes and rims mounted on tempered shaft. - Height Adjustment. MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180 BRAKE ARMS STRUCTURE - Galvanized metal plate for 'hose brake; - Hose coil positioner.

SUGGESTION OF COILS (MULCHING) SIZE OF BED IN THE TOP PART (m) 0,70 A 0,90 • This unit is easily hitched to different types of tractors, both category I and II. WORK INSTRUCTIONS Note: In special cases, please contact us. • You must hitch the plastic layer to the tractor using the tractor`s third point. Never use a chain. • Level and centralize the implement, making sure there are no clearance on the sides. HOW TO DEFINE THE COIL (MULCHING) SIZE • Add the dimension at the top to the two side heights of the bed. COLOR CHOICE MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

OPERATING THE PLASTIC MULCH LAYER • Mount the plastic coil (Mulching) on the shaft of the plastic mulch layer according to the size of the bed (see table on page 07); • Lower the plastic mulch layer until the positioning tube (fig 2) does not hit underneath the chassis; • Position the pair of small front discs (fig 1) near the bed base so it can remove part of the earth (approximately the volume of half disc). Carry out this operation in an area of approximately 2 meters; • Position the pair of wheels (fig 3) in the open furrow while moving away from the bed wall approximately 3.0 centimeters,...

MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

NOTES • Beds of equal dimensions, but in different locations, will require that all adjustments of the plastic mulch layer be re-made; • Soil with roots, rocks and /or stem remains from various crops can compromise the quality of the covered bed; • At the beginning and end of the bed, always pay attention if the length of the plastic mulch film will be enough to cover the ends/heads. Ends shall be covered by hand; • For improved quality, we recommend that you have available a tractor driver (to drive the tractor) and another person to help cover the beginning and end of the bed; • If, by any...

GENERAL NOTES MEC-RUL reserves the right to modify the technical specifications of its products without prior notice and with no obligation to modify products that have already been sold. MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

POSITIONING ROLLER ASSY PLASTI FILM LAYER ROLLER GROUP MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180 ARTICULATING SUPPORT

FRONT DISC ASSY (SMALL) FILM LAYER DISC FLANGE DISC SHAFT GROUP CLEANING SUB-GROUP MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

POSITIONING WHEEL GROUP SUSPENSION REGULATOR WHEEL ASSY SHAFT SUBGROUP MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180 SUSPENSION STEM SUBGROUP

REAR DISC ASSY - LARGE FILM LAYER DISC FLANGE O DISC SHAFT GROUP CLEANING SUBGROUP MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

SUPPORT WHEEL ASSY SUPPORT WHEEL GROUP MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

MULCH SHAFT ASSY MULCHING SHAFT GROUP GUIDE-FLANGE GROUP SCREW GROUP MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

PLASTIC MULCH FILM LAYER 180 MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

BRAKE GROUP GUIDE-SHAFT GROUP HOSE ROLLER SUPPORT GROUP SCREW GROUP HOSE POSITIONER GROUP FRONT DISC ASSY - SMALL 11" REAR DISC ASSY - LARGE 13" MULCH SHAFT ASSY 180 SUPPORT WHEEL ASSY POSITIONING ROLLER ASSY HOSE SHAFT FILM MULCH LAYER FRAME CLAMP GROUP LOCK PINWITH RING 3/8"X1.3/4" BENT CLAMP GROUP - RH BENT CLAMP GROUP - LH HOSE REEL GROUP POSITIONING WHEEL GROUP - RH POSITIONING WHEEL GROUP - LF PLASTIC LAYER – ARTICULATOR SUPPORT MANUAL PLASTIC MULCH BED LAYER - PCMR 120 / 180

+ 55 54 3213 8800 | BR. 116 / KM 153,2 - Bairro Panazzolo - 95080-050 - Caxias do Sul/RS - Brazil [email protected] | [email protected] | www.mec-rul.com.br PLASTIC MULCH BED LAYER - PCMR 120 / 180