Subsoiler
16Pages

USER’S MANUAL AND SPARE PARTS CATALOGUE AGRICULTURAL REAR PLANER PTMR 130 | 150 | 190 | 200 | 230 | 240 TRACTOR REAR SHOVEL PAMR 220 AGRICULTURAL WINCH GAMR

Review: A Date: 01/03/2016 Code: 0.4101.0036

CONTENTS PAGE 04 • Safety Instructions • Maintenance • Operating Instructions • Important • Warranty Term • Spare Parts • Versions into other Languages • Color Choice AGRICULTURAL REAR PLANER AGRICULTURAL WINCH PAGE 05 • Technical Features PAGE 09 • Technical Features • Adjustments and Operations PAGE 14 • Technical Features • Adjustments PAGE 06 • Frame PAGE 08 • Wheel Assy TRACTOR REAR SHOVEL PAGE 12 • Technical Featu

SAFETY INSTRUCTIONS 1) Carefully read all instructions and get familiar with all information herein contained; 2) Do not allow untrained people to operate the equipment, as accidents may happen; 3) Do not allow children to play nearby the equipment or over it when the equipment is operating, being transported o even stored; -Wear personal protection equipment; -Wear suitable clothing and footwear. Do not wear loose-fitting clothing or chains etc. as they may get caught in the moving parts of the equipment. 4) Only the operator is allowed on the tractor while it is operating in the field or...

SUBSOILER TECHNICAL FEATURES DESCRIPTION OVERALL WIDTH CUTTING WIDTH The MEC-Rul subsoiler is designed to break up the compacted layers of soil, allowing for water infiltration and root development. Makes the work of rotary hoes easier. Cast iron shanks with reversible points in special steel. Shank disarming system with fuse-pins. * Optional: frames allow the transposition of the front shanks to the rear, making easier to remove branches and stones. A - Height-Adjusting Pin B - Fuse-Pin (safety) * Optional: Wheel assy. Lubricate every 8 service hours.

WITH DEVICE TO RECEIVE OTHER EQUIPMENT WITHOUT DEVICE TO RECEIVE OTHER EQUIPMENT WITH DEVICE TO RECEIVE OTHER EQUIPMENT WITHOUT DEVICE TO RECEIVE OTHER EQUIPMENT WITH DEVICE TO RECEIVE OTHER EQUIPMENT WITHOUT DEVICE TO RECEIVE OTHER EQUIPMENT WITH DEVICE TO RECEIVE OTHER EQUIPMENT WITHOUT DEVICE TO RECEIVE OTHER EQUIPMENT WITH DEVICE TO RECEIVE OTHER EQUIPMENT WITHOUT DEVICE TO RECEIVE OTHER EQUIPMENT WITH DEVICE TO RECEIVE OTHER EQUIPMENT WITHOUT DEVICE TO RECEIVE OTHER EQUIPMENT WITH DEVICE TO RECEIVE OTHER EQUIPMENT WITHOUT DEVICE TO RECEIVE OTHER EQUIPMENT WITH DEVICE TO RECEIVE OTHER...

WHEEEL CLENING SHEET SUBSOILER WHEEL WHEEL PROTECTION COVER SEALING WASHER WHEEL SUPPORT GROUP ITEM CODE WHEEL ASSY *OPTIONAL

TRACTOR REAR PLANER TECHNICAL FEATURES DESCRIPTION BLADE WIDTH BLADE HEIGHT VERTICAL TILT HORIZONTAL TILT APPROX. WEIGHT The Mec-Rul Tractor Rear Planer is fitted with a practical and fast horizontal and vertical adjusting system. Designed to open irrigation canals, small embankments, maintenance of roads, contour lines, and others. Reverse system allows it to operate in reverse gear. ADJUSTMENTS AND OPERATIONS DEPTH ADJUSTMENT 1 – The depth of the Tractor Rear Planer is adjusted by means of the lever of the tractor`s hydraulic lifting system. FIG 1 VERTICAL ADJUSTMENT 2 – To carry out...

OPERATIONS 1 - Figure 03 shows the Tractor Rear Planer in the vertical position for works such as: - Level curve; - Opening of canals; - Shallow ditches, etc. 2 - The operating conditions will determine which is the best angle at which the planer should operate. Increasing the angle will increase the soil resistance in the blade, therefore, adjust at an angle that is sufficient to move the soil without much resistance. 3 - The blade can be mounted laterally, approximately 300 mm to the left or right, for jobs such as fences, walls, trees, etc. To do this, loosen the nuts securing the planer...

TRACTOR REAR PLANER ITEM CODE THIRD-POINT HITCHING PIN FIXING CLAMP FRAME GROUP – CAT I AND II FRAME GROUP HORIZONTAL ADJUSTMENT PIN COTTERPIN SPRING ADJUSTMENT SUPPORT GROUP HORIZONTAL ADJUSTMENT SUPPORT GROUP HORIZONTAL ADJUSTMENT SUPPORT GROUP SPRING WASHER BLADE TIGHTENING GROUP HEX. NUT BLADE GROUP 130 BLADE GROUP 190 BLADE GROUP 200 BLADE GROUP 230 BLADE GROUP 240 CURVED BLADE 130 CURVED BLADE 150 CURVED BLADE 190 CURVED BLADE 200 CURVED BLADE 230 CURVED BLADE 240 PLOW SCREW SPRING WASHER ½” HEAVY COTTERPIN 1/4X2” MAIN PIN GROUP

TRACTOR REAR SHOVEL TECHNICAL FEATURES DESCRIPTION *LIFTING HEIGHT LOADING CAPACITY AVERAGE WEIGHT TRACTOR POWER The Mec-Rul Rear Shovel can be hitched to the tractor through the three-point system. Designed to carry lime, earth, silage and other materials. Practical and simple unhitching by means of a lever. Height adjustment, providing better performance in a wide range or services and tractors. Before you start operating your Tractor Rear Shovel, make sure it is fully mounted and properly attached to the tractor. This will avoid risks of accidents and damage to the equipment. When...

TRACTOR REAR SHOVEL REAR SHOVEL CHASSIS GROUP BUCKET UNHITCHING GROUP TORSION SPRING BUCKET GROUP LEVER GROUP CLIPS FOR STEEL CABLE Ø3/16” REAR SHOVEL BLADE MANUAL TRACTOR REAR SHOVEL - PAMR 220

AGRICULTURAL WINCH TECHNICAL FEATURES DESCRIPTION MAXIMUM LIFTING HEIGHT (MM) ADJUSTMENTS The Mec-rul agricultural winch is fitted with an adjustment system that allows you to either increase or decrease elevation. To adjust elevation follows the steps below: - First, release the lock with ring (1) and remove the pin (2). - Then choose the hole that matches the height you wish to reach. - Then complete the operation by re-positioning the pin (2) and the lock with ring, (1). 2 The Mec-Rul Agricultural Winch is activated by the hydraulic system of the tractor. Fitted with a hook with lock ad...

AGRICULTURAL WINCH ARMS GROUP WINCH CHASSIS GROUP MANUAL AGRICULTURAL WINCH - GAMR

+ 55 54 3213 8800 | BR. 116 / KM 153,2 - Bairro Panazzolo - 95080-050 - Caxias do Sul/RS - Brazil vendas@mec-rul.com.br | rugeri@mec-rul.com.br | www.mec-rul.com.br AGRICULTURAL REAR PLANER PTMR 130 | 150 | 190 | 200 | 230 | 240 TRACTOR REAR SHOVEL PAMR 220 AGRICULTURAL WINCH GAMR