Mecanil SG280

Product catalog summary

Overview: The Mecanil SG280 is a grapple saw with a tilt function designed for installation on trucks, forest machines, and excavators. It is available in four models: SG280, SG280 RC, SG280 A, and SG280 A RC, each offering different control systems and features.

Specifications:

Tilt Function: Available in all models.
Collecting Unit: Included in SG280 A and SG280 A RC models.
Grapple Size: 0.28 m² for all models.
Weight: Ranges from 335 kg to 440 kg depending on the model.
Working Pressure: Maximum of 220 bar.
Oil Flow Rate: 50-100 l/min, recommended 60-100 l/min.
Grapple Opening: 1540 mm.
Attachment Rotator: 173/6 for all models.
Control: Options include cable control and wireless control, with power options of 12V or 24V.
Cutting Diameter: 550 mm with a 22” saw.

Control Systems:

SG280: Cable control with separate control buttons for joystick installation.
SG280 RC-T: Wireless control with a handheld remote.
SG280 RC-M: Wireless control with joystick-installed buttons.
SG280 A: Cable control with collecting unit and joystick-installed buttons.
SG280 A RC: Wireless control with collecting unit and joystick-installed buttons.

Grapple Claw Alternatives:

Normal log grapple claws.
Energy grapple claws with 4 spikes.
A-model claws with diagonal plates.

Features:

Fast and easy to use, enhancing productivity.
Stable in both felling and loading positions.
Full control over all functions, allowing multiple saw movements without opening the grapple.
Functions as a traditional loading grapple.
Easy installation with no additional hydraulic lines needed.
Stepless control, allowing tilt to be stopped halfway if necessary.
Optional radio control with two batteries and a charger.

Manufacturer: Mecanil Oy Ab, Valtatie 565, 07880 Liljendal, Finland. Contact: +358 19 661 2600, [email protected], www.mecanil.fi

Catalog excerpts

Grapple saw with tilt function for installation on trucks, forest machines, excavators etc.

Open the catalog to page 1

Model_SG280_SG280 RC_SG280A_SG280A RC Tilt function Yes Yes Yes Yes Collecting unit No No Yes Yes Oil flow rate 50-100 l/min. 50-100 l/min. 50-100 l/min. 50-100 l/min. Control Cable control Wireless control Cable control Wireless control Cutting diameter (saw 22") -> 550 mm -> 550 mm -> 550 mm -> 550 mm • 2 hydr. lines (grapple open/dose) • Cable along the crane. Separate control buttons that can be installed in joystick. • 2 hydr. lines (grapple open/close) • Wireless control with remote control you hold in your hand. • 2 hydr. lines...

Open the catalog to page 2

Mecanil SG280

Mecanil SG280

Catalog excerpts

All Mecanil Oy AB catalogs and technical brochures