MEIER-BRAKENBERG Disinfection Gate mobile and stationary preventive biosecurity measure acute epidemic control

Mobile Disinfection Gate DESTORmobil500 can be quickly installed at the boundary of operations or restricted areas in acute cases of epidemics. Vehicles of all kinds are automatically decontaminated without the need for manpower. A high-efficiency sensor system detects incoming or outgoing vehicles and triggers the disinfection pump. Nozzles that are not susceptible to wind and that are installed overlapping in the arch and floor ramp wet the vehicles over their entire surface with a high application rate. The solution is reliably mixed by a dosing pump. In brief: ● The disinfection gate is a...

DESTOR ST500 DESTOR ST200 DESTOR ST100 Stationary Disinfection Gates Stationary drive-through locks are located at the operation’s boundary on a steel pan or concrete floor with collecting device. Once installed, they permanently protect your own operation. They prevent the spread of epidemics and pathogens at logistical hotspots. The spray arch consists of a solid tubular frame with integrated nozzles that are not susceptible to wind. The pump ensures a constantly high pressure and a high disinfectant solution application rate of 0.4 l/m² at a passage speed of 2.4 km/h. The door is stabilised...

Disinfection Gates in Detail Dosing technology: Dosage of the active agent and automatic filling system for the solvent container. Exact dosing of liquids, water consumption measurement and data storage on SD card. Integrated in pump and control box. Dimensions: 1.38 x 0.8 x 1.05 m Collecting pan: Two-piece steel collecting pan, primed and painted. Dimensions: 3.81 x 4.30 x 0.07 m Mobile collecting pan: Disinfection and collecting pan made of tear-resistant coated polyester fabric, lateral upturns, entry and exit side with flexible foam core (suitable for Destor mobil 500). Programmable highefficiency...