ET SERIES Bucket elevators
7Pages

ET SERIES Bucket elevators

ET SERIES BUCKET ELEVATORS Reliable performance, construction quality, easy assembly: the perfect solution Ideal for vertical handling of cereals, oilseeds and legumes, the Metalmont ET series bucket elevators stand out for their highly reliable operation and performance. Designed and built to ensure the best performance even in the most difficult working conditions and to minimise maintenance and total operating costs. RANGE from 20 to 400 t/h - different flow rates available on request In order to improve the product and for regulatory compliance, the technical specifications, appearance...

• High-density polyethylene (HDPE) • High resistance to abrasion • Excellent resistance to impacts • Multilayer with rubber cover and reinforcement plies • Anti-oil and anti-grease according to international standards • Antistatic according to international standards • Flame retardant, according to international standards 3 HEAD (DRIVING WHEEL) • • • • • • • • • Helical bevel gearmotor: hollow shaft with direct coupling to the driving shaft; back stop device; protective cover High resistance steel driving shaft Rubber-coated pulley and rounded for belt centring Supports with self-aligning...

INSPECTION PORTHOLE HEAD MISALIGNMENT SENSOR DUCTS DISCHARGE HOPPER • Square outlet • Press-folded welded and hot-dip galvanised • ET-020 / ET-300 / ET-400 press-folded and bolted INSPECTION DUCT • Removable panel • Porthole BELT MISALIGNMENT SENSOR SPEED CONTROL SENSOR In order to improve the product and for regulatory compliance, the technical specifications, appearance and equipment described in this document may be subject to change without prio

TECHNICAL DATA SHEET MODEL Flow rate* Bucket width / Belt width Anti-oil, antistatic and flame retardant Type of belt Buckets / m Bucket material High-density polyethylene (HDPE) Casing thickness Head wear-resistant element (UHMW PE) *Polyurethane Head height Casing front width Casing side width Standard casing height Inlet/outlet size *Flow rate referred to s.w. wheat 0.78 t/m3; RH 15%; impurities: 2% In order to improve the product and for regulatory compliance, the technical specifications, appearance and equipment described in this document may be subject to change without prior notice

ACCESSORIES AND DEVICES MODEL Temperature bearings sensor Anti-clogging sensor on the head Hot-dip galvanising of the casings according to UNI EN ISO 1461 Hot-dip galvanising of head and tail end according to UNI EN ISO 1461 Painted or stainless steel execution Speed control sensor Back stop device Belt misalignment sensor on tail Belt misalignment sensor on head Dust suction connection between the casings Servo-ventilated motor when running on frequency inverter Porthole for visual inspection on inspection casing Stainless steel or iron buckets Food grade belt Driving drum rubber coating...

Metalmont s.r.l. Via Guglielmo Marconi, 92 31020 Revine Lago (TV) Italy +39 0438 562028 info@metalmont.it