IC-DTS FLOW ME TER DISPLAY The Metri DTS (Display Transmitter Switch) is an industrial flow meter display designed for use with Turbine and Paddlewheel flow sensors that have a magnetic mV output. The DTS display offers users a simple easy to read control interface providing Analogue 4-20mA (Flowrate) with a High or Low relay alarm output. The alarm can be reset once a problem has been identified and resolved. The DTS accuracy can be further enhanced with an optional (Factory set) 10 point linearisation with the frequencies entered at each point. The unit will interpolate between these points to enhance the flow meter accuracy within the flow range and enhance repeatability. The display itself is a 36mm x 28mm backlit LCD screen, making it easily visible in dimly lit areas. It has 2 x 10 characters of text providing quick access to flowrate, totalisation and alarm status information. Flexibility is further enhanced with the option of a compact (sensor mounted) or remote display away from the flow meter when the meter location is in poor access areas or in higher temperature applications. When the alarm is triggered the display flashes until the alarm setpoint hysteresis has been reached. Features include: • • • • • • Compact or remote installation Visual alarm Local flow rate and totaliser indication Resettable totalizer Compatible with IC-LPM Paddlewheel or IC-LTM Turbine flow sensors The DTS can be fitted to a wide range of other flow meters, please contact us for further information. Summary • Brand: Metri • Category: Flow Display • Fluid type: Liquids • Part Ref: IC-DTS • IWN: FLO-20191128 Local or Remote Flowrate Totaliser 4-20mA Analogue Output Suitable for the following market sectors: Industrial & Energy Oil & Gas Research & Development Power Generation Water & Wastewater Compatible with a range of flow sensors, contact us for further information. 10 Point (Factory Set) Linearisation Low / High Alarm Output Backlit LCD Display Fast & Easy Configuration DTS FLOW DISPLAY DATA SHEET

SPECIFICATION DETAILS MODEL CONFIGURATIONS VERSATILE CONFIGURATIONS Ordering information Ordering information for the IC-DTS Flow Meter Display Flow u Alarm failsafe IC-DTS - Standard base unit including: • Flow display • Totaliser display • 4 - 20mA output • Alarm visual output • Alarm Relay switch • Remote reset • Wall mounting plate IC-DTSL - Linearisation unit including: • Features as standard base unit • Linearisation (Factory set) 87 (Connector Sockets) Allow 190mm when cable plugs are fitted.

Scope of Delivery The IC-DTS display is supplied as remote or fitted to IC-LPM Paddlewheel or IC-LTM Turbine flowmeters. IC-DTS display is a Flow rate and Totaliser with 4-20mA and Relay output Alarm switchpoint that can be set as high or low anywhere in the flow range. Switch/Alarm adjustment - User settable The IC-DTS display internal A. Top left - Low / High alarm selection B. Top right - Totaliser reset C. Bottom left - set/run alarm switch D. Bottom right - alarm adjust potentiometer HIGH ALARM SCREEN Alarm hysteresis default is 2% of fullscale range High Alarm 50 L/M NORMAL SCREEN Model Factory...