IC-FMS FLOW MONITOR
4Pages

{{requestButtons}}

Catalog excerpts

IC-FMS FLOW MONITOR - 1

IC-FMS FLOW MONITOR The FMS is an industrial paddle wheel flow meter specifically designed for measuring the flow rate of liquids. The FMS display offers users an easy to read and control interface for Analogue 4-20mA (Flowrate) with a High or Low relay alarm output which can be configured for flowrate deviation or totalisation (Batch control), all packaged in a rugged stainless-steel body and enclosure. A variety of connection types, high pressures and temperature ratings make the FMS the ideal partner for a wide variety of general purpose, medical and industrial applications where good repeatability accuracy and a long service life are required. The display itself is a 36mm x 28mm backlit LCD screen, making it easily visible in dimly lit areas. It has 2 x 10 characters of text providing quick access to flowrate, totalisation and alarm status information. Flexibility is further enhanced with the option of a remote FMS display away from the flow meter when the meter location is in poor access area's or in higher temperature applications. When the alarm is triggered the display flashes until the alarm setpoint has been exceeded. The alarm can be reset once the problem has been identified and resolved. Features include: • Compact • Visual alarm • Local flow rate and totalizer indication • Resettable totalizer • Compatible with IC-LPM and IC-LTM Local or Remote Flowrate Totaliser 4-20mA Analogue Output | Low / High Alarm Output BacklitLCDDispla^J Easy to Install I Summary • Brand: METRI • Category: Flow Meters, Flow Switches • Fluid type: Liquids • Part ref: IC-FMS • IWN: FLO-171113 Suitable for the following market sectors: Oil & Gas 0 Industrial & Energy © Research & Development • Power Generation © Water & Waste water Suitable for use with the following liquids: © Chemical Clean Water Fuel & Oil IC-FMS DISPLAY DATA SHEET

Open the catalog to page 1
IC-FMS FLOW MONITOR - 2

* approximate weight based on IC-MV-PO/AN output board and ANSI 300/PN40 if flanged IC-FMS DISPLAY DATA SHEET

Open the catalog to page 2
IC-FMS FLOW MONITOR - 3

Ordering information for the IC-FMS Display IC-FMS DISPLAY DATA SHEET

Open the catalog to page 3
IC-FMS FLOW MONITOR - 4

Scope of Delivery The IC-FMS display is supplied as remote or fitted to IC-LPM paddlewheel and IC-LTM Turbine flowmeters. IC-FMS display is a Flow rate and Totaliser with 4-20mA and Relay output Alarm switchpoint that can be set as high or low anywhere in the flow range. Switch/Alarm adjustment - User settable The IC-FMS display internal A. Top left - Low / High alarm selection B. Top right - Totaliser reset C. Bottom left - set/run alarm switch D. Bottom right - alarm adjust potentiometer HIGH ALARM SCREEN Alarm hysteresis default is 2% of fullscale range High Alarm 50 L/M NORMAL SCREEN...

Open the catalog to page 4

All Metri Measurements catalogs and technical brochures

  1. IMCL

    4 Pages