END1 ENDERUN AUTOMATIC SWINGING COW BRUSH
11Pages

END1 ENDERUN AUTOMATIC SWINGING COW BRUSH USER MANUAL 1- DESCRIPTION Swinging Automatic Cow Brush END1; Enables for animals clean and confortable, designed as milking more and valuable milk at milking production. END1, can swing/move both 4 sides without facing high Push Power from the animals. Brush's swinging speed, Thickness, material and bristle diameter, have been chosen to offer the best solution, and do not make any troubles/damages on cow's leathers, for the cow's health. The design of the machine meets the requirements of the machinery regulations standard. (2006/42/CE) under the conditions described in Section 2, it is safe for animals and humans. Read and understand the Safety Notices section carefully END1 is easy to install and easy to use. Automatic start and stop is monitored and controlled by the electronic card. The system does not need any external sensor. Insurance and electronic current limiting on the card provides double protection against the bad conditions of the card and engine, electrical and animal use. ENDERUN SAQIM SISTEMLERI VE TARIM MAKINALARI LTD.ST1. Adress : Minardi Cavus Mah.Dokumculer San.Sit.l03.Sok.No:22 Nilufer, Bursa / TURKEY Tel: +90 224 4110948 Fax: +90 224 4110957 www.milkm ach. com saleslPmilkmach.com.tr / exportpmilkmach.com.tr

The user manual gives you the basic guidelines for handling, safety and maintenance. It is very important to follow and understand the instructions clearly. The manufacturer is not legally liable for any damages or indirect damages arising from operating errors, electrical problems, lack of maintenance and/or the use of non-original spare parts and accessories not described in this manual. All parts of the END1 machine, including the body, are designed and manufactured by considering the safety of the animals. For the long-lasting use of END1, taking care of the safety of animals, no...

END1 ENDERUN AUTOMATIC SWINGING COW BRUSH USER MANUAL The hairs of the tails of the animals to use END1 should be shaved. The long-haired part at the end of the tail should be at most 3cm. The tail feathers are not shaved at all, or the long hairy part on the end is left more than 3cm, which can cause the tail to be attached to the brush or even the tail to break. END1 is suitable for dairy cows older than one year, and should not be used for animals such as dogs, sheep, goats due to their long hair. END1 can be used for an average of 25 animals per brush. 3 different color Combinations can...

3- TECHNICAL INFORMATIONS GENERAL END1 can be mounted in two ways: 1 - Wall Mounting 2-Pole Mounting For Pipe : 2" to 4" (Pole's Diameter between 50mm - 100mm) For Profile : 50x50mm to 150x150mm ENDERUN SAGIM SISTEMLERI VE TARIM MAKINALARI LTD.5T1. Adress : Minareli Cavus Mah.Dokumculer San.Sit.l03.Sok.No:22 Nilufer, Bursa / TURKEY Tel:+90224 4110948 Fax: +90 224 411 0957 www.milkmach.com salestSimilkmach.com.tr/ export(S>milkmach.com.tr

ENDERUN SAGIM SISTEMLERI VE TARIM MAKINALARI LTD.ST1. Adress : Minareli Cavus Mah.Dokumculer San.Srt.l03.Sok.No:22 Nilufer, Bursa / TURKEY Tel: +90224 4110948 Fax: +90 224 411 0957 www.milkm ach. com sales@milkmach.com.tr / export@milkmach.com.tr

END1 ENDERUN AUTOMATIC SWINGING COW BRUSH USER MANUAL 6- SETUP & INSTALLATION GENERAL Installation must be carried out by the distributor authorized by the Turkish Manufacturer Enderun Company. The wiring and power used in the electrical installation to be connected to the machine must be in accordance with the technical specifications of the machine. In terms of human and animal safety, electrical installation must be properly grounded and leakage current circuit must be used. END1 is fully assembled and packaged in a thick box. Movable parts are fixed at two points to protect them from...

END1 ENDERUN AUTOMATIC SWINGING COW BRUSH USER MANUAL WALL MOUNTING a-) Specify the position and height of the brush body b-) Use the Pole Mounting Plate to mark the fixing holes. Mark the 4 fixing holes on the wall, and then drill with ø12 drill. c-) Put M10 steel dowels in holes and mount the Cow Brush, fix it with nuts. Note: steel dowels are not included in the package. d-) Hold the brush to remove the fixing plate, release the brush carefully and gently e-) Remove the fixing bolt

END1 ENDERUN AUTOMATIC SWINGING COW BRUSH USER MANUAL POLE MOUNTING a-) Specify the position and height of the brush body. b-) Using the Pole Mounting Plate, connect END1 to the pole with M12 x 140 bolts. Make sure it is firmly secured. c-) Remove the fixing plate by holding the brush, carefully and gently. d-) Remove the fixing bolt. Electrical Installation The END1 is ready with the power cord plug and the cable comes from inside the machine. The plug must be connected to the main supply outlet, then ready to operate. No other equipment is needed. Only the Pako Switch can be installed as...

END1 ENDERUN AUTOMATIC SWINGING COW BRUSH USER MANUAL 5- OPERATION The scratch brush starts working automatically when the cow pushes the brush. When the animal leaves the brush, after returning to the vertical position, it continues to Spin 15 seconds more and then stops. If there is a strain due to tail jam, the electronic card will stop the engine and stop it running for 3-4 seconds in the opposite direction. When it comes to vertical position, it automatically resets itself. When the brush is shaken due to the wind, a special filter prevents the engine from running unnecessarily. 6-...

END1 ENDERUN AUTOMATIC SWINGING COW BRUSH USER MANUAL REDUCER MAINTENANCE AND OIL REPLACEMENT (END1-E) Reducer oil should be replaced every 5000 hours. For example, the reductor oil of a brush working about 6-7 hours a day should be replaced by a brush oil of 2 years and a brush oil of 12-14 hours a day. It is recommended to change the oil every 4 years even if it is not used. 0,4 liter SAE 140 mineral gear oil is used in Gearbox. Suitable oil brands and models : * PETROL OFİSİ - KEBAN 140 * MOBIL - MOBILUBE C 140 * SHELL-DENTAX 90 * BP-GEAR OIL 140 * CASTROL-MAJESTIC GEAR OIL 140 * GULF -...