INSTALLATION INSTRUCTIONS AND SPECIFICATIONS FOR MODEL 1100 & 1200 READ CAREFULLY MIRACO A DIVISION OF AHRENS AGRICULTURAL INDUSTRIES, INC. BOX 686 GRINNELL, IOWA 50112 PHONE 641-236-5822 TOLL FREE 1-800-541-7866 FAX 1-641-236-3341 www.Miraco.co

PART 1 - GENERAL A. DESCRIPTION: 1. EquiFount is designed for small numbers of livestock to be bolted on a wall in the corner. A pressurized water source is required. Electrically heated model available #1100. B. WEIGHTS & DIMENSIONS: Model # 1100 1100 1200 1200 C. Description Non-heated Heated Wallmount Electric Wallmount MATERIAL NECESSARY FOR INSTALLATION: 1. 1/2" x 3" galvanized lags or bolts. PART II - MATERIALS, PRODUCTS A. VALVE: 1. Miraco plastic plunger style valve. OVERHEAD WATER SUPPLY STALL WALL WATER - ELECT. ENTRY VALVE COMPARTMENT 1/2" WATER LINE COLD CLIMATE INSTALL ELECTRIC SUPPLY...

Warm Climate Use Water line from above should be protected with the pipe sleeve or wood. Use 1/2" x 3" lags or bolts (galvanized). Lags are easiest if there is nothing on the other side of the studs, otherwise use galvanized bolts. Put nuts on the inside. Distance from the floor at the owners discretion. Cold Climate Use Water lines should be buried below frost line, overhead lines need to be wrapped with heat tape. Heat pad never comes in contact with water. Extremely safe for the animal. Molded bottom fits together air tight. Water line from below entering through an insulated tube #834-5 from...

Water Level Adjustment Photo From Underside Of Fount Easy Hook Up 1/2” thread When installing heat cable above do not wrap. Water Filter