Agricultural Tyres Edition 2016/2017
1 / 208Pages

Agricultural Tyres Technical Databook Edition 2016/2017

Mitas Technical Databook for Agricultural Tyres – World edition 2016 / 2017 The extensive technical data and other information relating to tyres and accessories on the following pages has been compiled to reflect as accurately and completely as possible the current state of development. Due to changes in our product range the tyre sizes given in this guide are not always identical to our available range. For further information please contact us: MITAS a.s. Švehlova 1900/3, 106 00 Prague 10, Czech Republic

Contents Tread patterns, markings and definitions List of tread patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 List of tyre sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tyre size marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Speed symbols and conversion tables . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Tyre sidewall marking and structures . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Load index . . . . . . . . . . . . . . . . . . . ....

Tread patterns Tractor Radial Tyres Trailer Radial Tyres Harvester Radial Tyres Tractor Diagonal

Diagonal Tyres

Tyre sizes List of tyre sizes

Size (inch) Tyre size (Alternative tyre size) Tread pattern Size (inch) Tyre size (Alternative tyre size) Tread pattern

Tyre sizes List of tyre sizes (continued) Size (inch) Tyre size (Alternative tyre size) Tread pattern Trailer Radial Size (inch) Tyre size (Alternative tyre size) 750/60 R 30.5 IMP 850/50 R 30.5 IMP Tractor Agro Forestry

Size (inch) Tyre size (Alternative tyre size) Tread pattern Implement Diagonal Size (inch) Tyre size (Alternative tyre size) Tread pattern

Tyre size marking | Speed symbols and conversion tables Tyre size marking Nominal section width (in mm) Radial construction Nominal rim diameter (in inches) H Cross-ply construction Nominal rim diameter (in inches) Nominal section width (in inches) Overall diameter (in inches) Nominal section width (in inches) Cross-ply construction Nominal rim diameter (in inches) Nominal section width (in inches) Reduced aspect ratio Cross-ply construction Nominal rim diameter (in inches) Nominal section width (in inches) Cross-ply construction Nominal rim diameter (in inches) Overall diameter (in inches)...

Speed symbols | Conversion tables Speed symbols and conversion tables Speed category Speed symbol Pressure units conversion table bar Units conversion table Length 1 imperial gallon (imp.gal) = 4.55 l

Tyre sidewall marking and structure | Load index Tyre sidewall marking 480/70 R 34 Tyre size marking Tread pattern code Tubeless tyre US tread profile marking Tyre structure Tread Pattern Breaker Cord Inner Liner Carcass Cord Sidewall Apex Bead Wire BIAS (DIAGONAL, CROSS-PLY) TYRE A pneumatic tyre in which the ply cords extend to the beads and are laid substantially at alternate angles less than 90° to the centreline of the tread. RADIAL PLY TYRE A pneumatic tyre in which the ply cords extend to the beads and are laid substantially at 90° to the centre-line of the tread, the carcass being...

Main applications | Radial Tyres Main applications – Radial Tyres We offer a wide range of tyres for almost every piece of equipment and application – from highhorsepower Traktors to massive combines, from field preparation to harvest. Our extensive line of premium radial agricultural tyres offers solutions to all your needs, from our High Capacity Tyres (HC) and Super Flexion Tyres (SFT) series or our wide footprint HC 70 and AC 65 series tyres to our AC 85 and AC 90 series for rowcrop applications. The development of the Silent Speed Tyres (SST), connects the outstanding field...

tyres for big combine Erntemaschinens. HC 3000 and SFT CHO are capable of higher maximum loads; at the same time the tyre permits gentler ground handling in the field and more comfort on the road. For Traktors with up to 200 hp, the Mitas range of premium Radialreifen offers a choice of three all-rounders. The 85 series standard radial AC 85 is ideally suited forwide-ranging applications 70 series wide tyre, has higher load capacities than normally available in the 70 series segment; it therefore offers gentler ground handling and can carry very heavy loads. The AC 65 is a wide tyre with a...

Tractor Radial Tyres | HC LOAD CAPACITY SOIL PROTECTION COST EFFICIENCY LOAD CAPACITY SOIL PROTECTION COST EFFICIENCY

Tractor Radial Tyres HC 2000 – New VF (Very High Flexion) tyre for high-horsepower tractors Lower inflation pressure provides excellent traction efficiency. Better ground protection thanks to reduced soil compaction. Higher load capacity for higher haulage efficiency. Constant tyre pressure at any speed (VF concept) For a load capacity 2 930 kg HC 1000 – New narrow VF tyre for self-propelled sprayers More lugs provide better durability, longer service live and lower operation cost. Higher maximum speed (65 km/h) for less time on the road. R educed soil compaction for higher loads thanks to...

Tractor Radial Tyres | HC HC 2000 Technical data and load capacities Tyre size Service Rims * description (permitted) LI/SS Loaded static radius (mm) Speed radius index * Further admissible rims on request ° Calculated Load values for 0.4 bar and 0.6 bar are for calculating dual and triple load values only. For plowing with single driven tyres in the furrow, a minimum inflation pressure of 0.8 bar is required. For intensive road transport at 65/50/40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded. All load values are valid for ground...

Tyre load capacity (kg) at tyre pressure (bar) 0.4 Tractor Radial Tyres

Tractor Radial Tyres | HC HC 1000 Technical data and load capacities Tyre size Service Rims * description (permitted) LI/SS Loaded static radius (mm) Speed radius index * Further admissible rims on request ° Calculated For intensive road transport at 65/50/40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded. All load values are valid for ground slopes up to and including 20% (11o). When operating on slopes greater than 20%, please, contact the producer. Tubeless tyres – may be used with a tube