HC series
HC series
- Tyre size and service description (e.g., VF 750/65 R 26 CFO, VF 1000/65 R 32 CFO).
- Load Index/Speed Symbol (LI/SS) indicating the load capacity and speed rating.
- Permitted rim sizes for each tyre model.
- Section width, overall diameter, loaded static radius, and rolling circumference measurements.
- Speed radius index and tyre load capacity at various inflation pressures and speeds.
- Load capacities are specified for different inflation pressures ranging from 0.4 to 4.0 bar.
- Speed categories include 0-50 km/h, 0-15 km/h for cyclic field operations (CFO), and dual configurations.
- Lower inflation pressures result in better traction efficiency and reduced soil compaction.
- For plowing with single driven tyres, a minimum inflation pressure of 0.8 bar is recommended.
- For intensive road transport, increase pressure by 0.4 bar to avoid exceeding maximum inflation pressure.
- Load values are valid for ground slopes up to 20%; for steeper slopes, consult the producer.
- Higher load capacity and haulage efficiency.
- Better ground protection due to reduced soil compaction.
- Improved handling on roads and cost efficiency due to longer service life and lower operation costs.
Catalog excerpts
VF Very High Flexion tyre | HC 3000, HC 2000 & HC 1000 HC 3000 & HC 3000 R – Technical data and load capacities HC 2000 – Technical data and load capacities Rims* (permitted) Loaded Section Overall static width diameter radius (mm) (mm) (mm) Speed radius index Tyre load capacity (kg) at tyre pressure (bar) 0.4 HC 1000 – Technical data and load capacities Tyre size Service description LI/SS Loaded Section Overall static Rims* width diameter radius (permitted) (mm) (mm) (mm) Speed radius index Tyre load capacity (kg) at tyre pressure (bar) 1.0 * Further admissible rims on request Trelleborg Wheel Systems is fully compliant with the limits on Polycyclic Aromatic Hydrocarbons (PAHs) determined by the European Directive EC/2005/69 and REACH Regulation EC/1907/2006, since December 1st 2009. Load values for 0,4 bar and 0,6 bar at 50 km/h are for calculating dual and triple load values only. For plowing with single driven tyres in the furrow, a minimum inflation pressure of 0.8 bar is required. For intensive road transport at 65/50/40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded. All load values are valid for ground slopes up to and including 20% (11°). When operating on slopes greater than 20%, please, contact the producer. Load-pressure data for cyclic applications apply to low-torque transport operations at max. speeds of 15 km/h and for a max. distance of 800 meters before discharging the load and returning empty. By cyclic application (CFO) is mean harvester´s motion with full grain tank till its discharging. CFO: Cyclic Field Operation Tubeless tyres – may be used with a tube. Mitas Agricultural Tyres HC series VF (Very High Flexion) tyre line Tyre load capacity (kg) at tyre pressure (bar) Trelleborg Wheel Systems Czech Republic a.s. Švehlova 1900/3 106 00 Prague 10, Czech Republic © TWS CZ : 03/2021/I/ Magic Seven | Subject to technical amendments, printing errors and mistakes in text or illustrations Tyre size Service description LI/SS Overall Loaded Rolling Speed Rims* Section
Open the catalog to page 1
VF Very High Flexion tyre | HC 3000, HC 2000 & HC 1000 HC 2000 VF (Very Hight Flexion) tyres for high-horsepower tractors HC 3000 & HC 3000 R VF harvester tyres for Cyclic Field Operation (CFO) Lower inflation pressure provides excellent traction efficiency. Higher load capacity for higher haulage efficiency. Larger footprint for better ground protection and reduced soil compaction. LOAD CAPACITY LOAD CAPACITY SOIL PROTECTION SOIL PROTECTION COST EFFICIENCY COST EFFICIENCY HC 3000 R – Gentle to grassland due to rounded shoulder. Constant tyre pressure at any speed (VF concept) for a load capacity...
Open the catalog to page 2All Mitas (brand di Yokohama TWS spa) catalogs and technical brochures
AGRICULTURAL TIRES226 Pages