*myagriexpo

3036-NCL

Product catalog summary

Infeed System: The system includes a 30-inch diameter top compression feed roll with an internal drive, a 14-inch diameter bottom feed wheel, and a 31-inch wide by 11'6" long live floor with two strands of WDH-120 chain.

Discharge System: Features a straight discharge chute with a hydraulically operated chip deflector that can be adjusted vertically and horizontally.

Control System: Equipped with a wireless remote control and a 60-foot tethered remote back-up system for chipper operation, allowing control over feed works, top feed roll, chip discharge chute, and throttle.

Additional Features: Includes a hydraulic feed drive, automatic reversing fan system, rear hydraulic stabilizers, light package, and an 11-HP air compressor with a lockable enclosure.

Chipper Assembly: The drum has a diameter of 36 inches and a width of 34 ½ inches. It uses six chipper knives and counter knives, both babbitt-style.

Options: Available options include a chip accelerator, MicroChipper package, ESPAR heating system, top load discharge, and tracks.

Specifications: The chipper has a chipping capacity of 23 inches, an infeed opening of 31 x 34 inches, and dimensions of 31'6" in length, 11'6" in height, and 8'4" in width. It weighs 36,500 lbs with a tongue weight of 7,200 lbs and an axle weight of 29,300 lbs. It features a tandem axle with a 36,000 lbs leaf spring suspension.

Engine and Capacity: Powered by a CAT engine with 540 to 765 HP, it has a fuel capacity of 160 gallons and a hydraulic oil capacity of 80 gallons. It uses four Super Singles tires and has air brakes. The towing arrangement includes a pintle hitch tongue with skidder plates.

Catalog excerpts

FEATURES » Infeed System consists of one 30" (76.2 cm) diameter top compression feed roll with internal drive, a 14" (35.56 cm) diameter bottom feed wheel, and a 31" (78.74 cm) wide x 11'6" (3.5 m) long live floor equipped with two strands of WDH-120 chain » Straight discharge chute and a hydraulically operated chip deflect with vertical and horizontal adjustment » Wireless remote control with a 60' (18.28 m) tethered remote back-up system for chipper operation. Functions include Aggre forward/reverse of feed works, up and down of top feed roll, operation of chip discharge chute and throttle » Hydraulic feed drive » Automatic reversing fan system » Rear hydraulic stabilizers » Light package » 11-HP (8.2 kW) air compressor with lockable enclosure CHIPPER ASSEMBLY » Drum diameter: 36" (91.44 cm) » Drum width: 34 V2" (87.63 cm) » Chipper knives (6): 11"x 7 5/i6" x %" thick (27.94 cm x 18.57 cm x 1.9 cm) » Counter knives: .11" x 6 3/8" x V2" thick (27.94 cm x 16.19 cm x 1.27 cm) » Knives and counter knives are babbitt-style OPTIONS » Chip Accelerator is a mechanically driven accelerator that fully loads vans with chips. » MicroChipper package: to include 12-knife drum, chip accelerator and 3x3 grate system » ESPAR heating system for cold-weather start » Top load discharge » Tracks Aggressive, sloped live floor and large Advantage 3™ Drum creates more Optional Chip Accelerator uniform chips Chipping Capacity MORBARK www.morbark.com 800.831.0042 SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS

Open the catalog to page 1

All Morbark, Inc. catalogs and technical brochures

6400XT
2 Pages
Morbark-Flail
5 Pages
M20R-Forestry
1 Page
Morbark-Drum-Chipper
6 Pages
4036-NCL
1 Page