» Infeed System consists of one m compression feed roll with internal drive, a 14" (35.56 cm) diameter bottom feed wheel and a 40" (101.6 cm) wide x 12'6" (3.81 m) long live floor equipped with three strands of WDH-120 chain in a staggered configuration » Straight discharge chute and a hydraulically operated chip deflect with vertical and horizontal adjustment » Wireless remote control with a 60' (18.28 m) tethered remote back-up system for chipper operation. Functions include forward/reverse of feed works, up and down of top feed roll, operation of chip discharge chute and throttle » Hydraulic feed drive » Automatic reversing fan system » Rear hydraulic stabilizers Aggressive, sloped live floor and large top feedwheel Advantage 3™ Drum creates more uniform chips Optional Chip Accelerator » Light package » 11-HP (8.2 kW) air compressor with lockable enclosure CHIPPER ASSEMBLY » Drum diameter: 36" (91.44 cm) » Drum width: 43 V2" (110.49 cm) » Chipper knives (8): 11"x 7 15/i6" x %" thick (27.94 cm x 18.57 cm x 1.9 cm) » Counter knives (8): 11" x 6 3/8" x ^" thick (27.94 cm x 16.19 cm x 1.27 cm) » Knives and counter knives are babbitt-style OPTIONS » Chip Accelerator is a mechanically driven accelerator that fully loads vans with chips. » MicroChipper package: to include 12-knife drum, chip accelerator and 3x3 grate system » ESPAR heating system for cold-weather start » Top load discharge www.morbark.com 800.831.0042 SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS