OPENER DRILL

The C2 Contour sheds trash like never before The C2 Contour lets you cut through trash and makes opener adjustments easier. The independent opener features parallel linkage for ultra-precise seed and fertilizer placement. Adjustable packing pressure lets you pull through damp spots. Opener spacing options are 10” and 12”. At the heart of the C2 Contour’s improved ability to shed trash is the design of the single shank. The reclined 12-degree angle moves trash up and off the shank faster. The distance from the ground level to the catch point has been increased to 21 inches on the C2 Contour, greatly...

The C2 Contour opener cam is higher and away from the ground so opener adjustments are much easier to make. The notched cam-and-pin system is at 1/4 inch intervals. Rotate the cam by hand and insert the pin to lock in the desired seeding depth. Pressure is maintained on the opener cylinders through a passive hydraulic system that uses a hydraulic accumulator. This unique hydraulic accumulator system acts as a hydraulic cushion for the trips, and being a passive system, greatly reduces the demand on the tractor hydraulics compared to the continuous flow required by similar drills. By adding or...

Specifications are estimates and subject to change. reduce soil build- double shoot openers debris from falling opener ports. Narrow transport models in 25 feet and 31 feet widths. This is an ideal option for front wheel assist tractors in the CORPORATE OFFICE & TRAINING CENTRE 2131 Airport Drive, Saskatoon, SK Canada S7L 7E1 www.morris-industries.com Questions? email: [email protected] The policy of MORRIS INDUSTRIES LTD. is one of continuing improvement; therefore, the company reserves the right to change any specification without notice.