Field Pro
2Pages

Field-Pro “Heavy Harrow Bar” Specifications and options FIELD-PRO “Heavy Harrow Bar” Specifications and Options 50 feet (15.24 m) 5-Bar Harrows 10’ (3.05 m) Wide x 72” (183 cm) Deep Tines - Straight 9/16” (1.43 cm) Diameter x 27 1/4” (69 cm) Long Hydraulic Tine Adjustmentt Cart Frames - 2" (5 cm) x 8" (20.3 cm) Structural Tubing Main Frame - 6" (15 cm) x 8" (20.3 cm) Structural Tubing Wing Frame - 6” (15 cm) x 8” (20.3 cm) Structural Tubing Harrow Arms - 1 1/2” (3.81 cm) x 3” (7.62 cm) Structural Tubing Safety Chain Safety Lights Base Size Main Frame -Single Axle -Tire Size Wing Axle (1 per wing) - Tire Size Wing T ransport Axle - (1 per wing) - Tire Size Lift Cylinders * Weight Harrow Tine Length Harrow Tine Spacing Heavy Harrow Harrow Tine Diameter Harrow Tine Angle Degree Range Overall Working Length Frame Ground Clearance *NOTE: Minimum Hydraulic Pressure 1,950 P.S.I. (13,435 kPa) Available in working widths of 50 and 70 feet. Convenient and visible gauge indicates tine adjustment settings. CORPORATE OFFICE & TRAINING CENTRE - 2131 Airport Drive, Saskatoon, SK Canada S7L 7E1 Telephone: 306.933.8585 Fax: 306.933.8626 www.morris-industries.com Questions? email: info@morris-industries.com The policy of MORRIS INDUSTRIES LTD. is one of continuing improvement; therefore, the company reserves the right to change specifications without notice. The policy of Morris is one of continuing improvements. The company therefore reserves the right to change any specifications without notice.

Highly Effective Straw Management Hydraulic Tine Control Heavy Duty Design Superior Independent Suspension The Field Pro Heavy Harrow is ideal for spreading and breaking up residues. It also provides excellent granular chemical incorporation, seedbed preparation and functionality as a finishing harrow. The two front ranks can be adjusted independently from the rear three ranks. This accommodates specific conditions for better straw flow through the harrow sections and preventing straw bunching. The hydraulic control option allows the operator to control the tine angle from the cab....