AUTO START & AUTO MAINS (UTILITY) FAILURE CONTROL MODULES CONTINUOUS VOLTAGE RATING CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT MAXIMUM STANDBY CURRENT CHARGE FAIL/EXCITATION RANGE GENERATOR & MAINS (UTILITY) VOLTAGE RANGE FREQUENCY RANGE • Automatically transfers between mains (utility) and generator (DSE6120 MKIII only) for convenience. • Hours counter provides accurate information for monitoring and maintenance periods • User-friendly set-up and button layout for ease of use • Multiple parameters are monitored & displayed simultaneously for full visibility • The module can be configured to suit a wide range of applications for user flexibility • PLC editor allows user configurable functions to meet user specific application requirements. • 4-line back-lit LCD text display • Multiple display languages • Five-key menu navigation • Customisable power-up text and screen images. • DSENet® expansion compatibility • Data logging facility • Protections disable feature • Fully configurable via PC using USB communications • Front panel configuration with PIN protection • Power save mode • 3-phase generator sensing and protection • 3-phase mains (utility) sensing and protection (DSE6120 MKIII only) • Automatic load transfer control (DSE6120 MKIII only) • Generator current and power monitoring (kW, kvar, kVA, pf) • Mains (utility) current and power monitoring (kW, kvar, kVA, pf) (DSE6120 MKIII only) • Over current protection • Breaker control via fascia buttons • Fuel and start outputs configurable when using CAN • 4 configurable analogue/digital inputs • 8 configurable digital inputs • CAN, MPU and alternator frequency speed sensing in one variant • Real time clock • Manual and automatic fuel pump control • Engine pre-heat and post-heat functions • Engine run-time scheduler • Engine idle control for starting & stopping • Fuel level alarms • 3 configurable maintenance alarms • Compatible with a wide range of CAN engines, including Tier 4 engine support • Uses DSE Configuration Suite PC Software for simplified configuration • IP65 rating (with optional gasket) offers increased resistance to water ingress • Configurable CAN read & transmitted information. MAGNETIC PICKUP VOLTAGE RANGE FREQUENCY RANGE Negative switching Negative switching digital input 0 V to 10 V sensor 4 mA to 20 mA sensor Resistive sensor Negative switching digital input Resistive sensor OUTPUT A & B (FUEL & START) PANEL CUT-OUT MAXIMUM PANEL THICKNESS STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE NON-HEATED DISPLAY VARIANT HEATED DISPLAY VARIANT RELATED MATERIALS TITLE DSE6110 MKIII & DSE6120 MKIII Installation Instructions DSE6110 MKIII & DSE6120 MKIII Operator Manual DSE6110 MKIII & DSE6120 MKIII Configuration Suite PC Manual OPTIONAL PARTS PART PART NUMBER Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com 3230 Williams Avenue, Rockford, IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL [email protected] WEBSITE www.deepseausa.com Deep Sea Electronics maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment AUTO START & AUTO MAINS (UTILITY) FAILURE CONTROL MODULES The DSE6110 MKIII is an Auto Start Control Module and the DSE6120 MKIII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information...