AUTO START & AUTO MAINS FAILURE CONTROL MODULES RELATED MATERIALS DSE7310 MKII & DSE7320 MKII Installation Instructions 053-181 DSE7310 MKII & DSE7320 MKII Operator Manual 057-253 DSE7310 MKII & DSE7320 MKII Configuration Suite PC Manual 057-243 • Configurable power-up mode • Enhanced graphical user interface • Drag & drop advanced PLC editor • MSC ID within PLC GenComm override • 4-Line back-lit LCD text display • Multiple Display Languages • Five key menu navigation • Heated display option available • Customisable power-up text and images • DSENet expansion compatibility • Data logging facility • Protections disable feature • Fully configurable via PC using USB, RS232 & RS485 communication • Front panel configuration with PIN protection • Power save mode • 3 phase generator sensing and protection • 3 phase mains (utility) sensing and protection (DSE7320 MKII only) • Automatic load transfer control (DSE7320 MKII only) • Generator current and power monitoring (kW, kvar, kVA, pf) • Mains current and power monitoring (kW, kvar, kVA, pf) (DSE7320 MKII only) • kW and kvar overload and reverse power alarms • Over current protection • Unbalanced load protection • Independent earth fault protection • Breaker control via fascia buttons • Fuel and start outputs configurable when using CAN • 2 configurable volt-free relay outputs • 6 configurable analogue/digital inputs • 8 configurable digital inputs • Configurable 5 stage dummy load and load shedding outputs • CAN, MPU and alternator frequency speed sensing in one variant • Real time clock • Manual and automatic fuel pump control • Engine pre-heat and post-heat functions • Engine run-time scheduler • Engine idle control for starting & stopping • Fuel usage monitor and low fuel level alarms • Simultaneous use of RS232 and RS485 communication ports • True dual mutual standby using RS232 or RS485 for accurate engine hours balancing. • MODBUS RTU support with configurable MODBUS pages. • Advanced SMS messaging (additional external modem required) • Start & stop capability via SMS messaging • 3 configurable maintenance alarms • Compatible with a wide range of CAN engines, including tier 4 engine support • Uses DSE Configuration Suite PC Software for simplified configuration • IP65 rating (with supplied gasket) offers increased resistance to water ingress • Modules can be integrated into building management systems (BMS) using MODBUS RTU • Automatically transfers between mains (utility) and generator (DSE7320 MKll only) for convenience. • Hours counter provides accurate information for monitoring and maintenance periods • User-friendly set-up and button layout for ease of use • Multiple parameters are monitored & displayed simultaneously for full visibility • The module can be configured to suit a wide range of applications for user flexibility • PLC editor allows user configurable functions to meet user specific application requirements. CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for upto 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT MAXIMUM STANDBY CURRENT CHARGE FAIL/EXCITATION RANGE GENERATOR & MAINS (UTILITY) VOLTAGE RANGE FREQUENCY RANGE MAGNETIC PICKUP VOLTAGE RANGE FREQUENCY RANGE Negative switching Negative switching digital input 0 V to 10 V sensor 4 mA to 20 mA sensor Resistive sensor Negative switching digital input Resistive sensor OUTPUT A & B (FUEL & START) PANEL CUT-OUT MAXIMUM PANEL THICKNESS STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE HEATED DISPLAY VARIANT Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 EMAIL [email protected] WEBSITE www.deepseaelectronics.com 3230 Williams Avenue, Rockford, IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 EMAIL [email protected] WEBSITE www.deepseaelectronics.com Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

ENVIRONMENTAL TESTING STANDARDS AUTO START & AUTO MAINS FAILURE CONTROL MODULES The DSE7310 MKII is an Auto Start Control Module and the DSE7320 MKII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem). The DSE7320 MKII will also monitor the mains (utility) supply. The modules include USB, RS232...