DSE7570REMOTE SYNC LOCK CONTROLLERFEATURES The DSE7570 Sync Lock Controller has been designed for manual connection and disconnection from the mains (utility) supply. The Sync Lock Controller provides a user-friendly zero-sync/phase locking solution, that is easily integrated with generators controlled by the DSE7510 or DSE8610 Load Share module. With forward and backward synchronising with the mains/utility supply, the DSE7570 is ideal for temporary generator installations. Where access is restricted, the DSE Sync Lock Interface is used to provide up to a maximum distance of 200 m between the DSE7570 Sync Lock Controller and the DSE7510 or DSE8610 Load Share module. ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY Safety of Information Technology Equipment, including Electrical Business Equipment BS EN 60068-2-1 Ab/Ae Cold Test -30 oC BS EN 60068-2-2 Bb/Be Dry Heat +70 oC Ten sweeps in each of three major axes Db Damp Heat Cyclic 20/55 oC Cab Damp Heat Static 40 oC Three shocks in each of three major axes 15 gn in 11 mS DEGREES OF PROTECTION PROVIDED BY ENCLOSURES IP67 - When case is closed. COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF GEN-SET HIRE APPLICATIONS

DSEGensetDSE7570SYNC LOCK CONTROLLER SPECIFICATION FEATURES DSE7570 SYNC LOCK DSE7510/DSE8610 GENERATOR CONTROLLER MAINS (UTILITY) SENSING GENERATOR SENSING INTERFACE BOX* CONTROL CABLE (1.5m supplied) customer extension possible ’Connections from interface box to DSE7510 / DSE8610 controller supplied (1.5m) CONTINUOUS VOLTAGE RATING CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT...