DSEGenset® Data Sheet DSE8610 MKII Synchronising & Load Sharing Auto Start Control Module Part Number: 8610-02 Overview The DSE8610 MKII is a market-leading Synchronising Auto Start Control Module suitable for use in a multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines. The DSE8610 MKII monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault conditions. System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder. The event log records 250 events to facilitate easy maintenance, and an extensive number of fixed and flexible monitoring, metering and protection features are included. Designed to offer increased built in support for active sensors for 0 V to 10 V & 4 mA to 20 mA. Comprehensive communication and system expansion options are available. Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers and alarms. With all communication ports capable of being active at the same time, the DSE8610 MKII is ideal for a wide variety of demanding load share applications. The Advanced PLC tool within Configuration Suite provides users with an extremely powerful configuration tool for the most demanding applications. Key Features • Slip sync and dead bus synchronising control • Multi-set communication (MSC) link with optional redundancy • 3-phase generator and bus sensing with protection • Latest ECU / ECM support for a wide range of engine manufacturers • Integrated governor & AVR control • Customisable shared data via MSC link • Advanced PLC functionality including multi-purpose PIDs • Flexible inputs and outputs • DSENet® expansion support • PC configuration using DSE Configuration Suite • Multiple language support • 4-line high-resolution display • Manual front panel and automatic control modes • Rubber sealing gasket (IP65 protection) • Integrated RS232 and RS485 ports providing Modbus RTU support Integrated Ethernet port providing Modbus TCP and SNMP v2c support Data logging of up to 20 parameters Manual front panel and automatic control modes Product Documentation 053-182 – DSE8610 MKII Installation Instructions 057-254 – DSE8610 MKII Operator Manual 057-238 – DSE8610 MKII Configuration Suite PC Manual DEEP SEA ELECTRONICS UK T: +44 (0) 1723 890099 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS USA T: +1 (815) 316 8706 E: [email protected] W: www.deepseaelectronics.com Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. DEEP SEA ELECTRONICS UAE T: +971 (0) 45910819 E: [email protected] W: www.deepseaelectronics.com Registered in England & Wales No.01319649 VAT No.316923457 DEEP SEA ELECTRONICS INDIA T: +91 20 68195900 E: [email protected] W: www

DSEGenset® Data Sheet DSE8610 MKII Synchronising & Load Sharing Auto Start Control Module Part Number: 8610-02 Multi-Set Controller Key Features • Multiple generator synchronising and droop / isochronous load sharing control • Advanced load demand schemes including automatic start / stop on load change, genset optimisation and balancing of engine hours • Multiple mains (utility) and generator synchronising ATS with short / long-term parallel control* • Mains (utility) failure detection including mains (utility) decoupling detection* • Based load and peak lopping / shaving control* Typical Applications...

DSEGenset® Data SheetDSE8610 MKII Synchronising & Load Sharing Auto Start Control ModulePart Number: 8610-02 Specifications Product Documentation 053-182 - DSE8610 MKII Installation Instructions 057-254 - DSE8610 MKII Operator Manual 057-238 - DSE8610 MKII Configuration Suite PC Manual DEEP SEA ELECTRONICS INDIA Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

DSEGenset® Data Sheet DSE8610 MKII Synchronising & Load Sharing Auto Start Control ModulePart Number: 8610-02 Specifications Product Documentation 053-182 - DSE8610 MKII Installation Instructions 057-254 - DSE8610 MKII Operator Manual 057-238 - DSE8610 MKII Configuration Suite PC Manual DEEP SEA ELECTRONICS INDIA Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

DSEGenset® Data SheetDSE8610 MKII Synchronising & Load Sharing Auto Start Control ModulePart Number: 8610-02 Specifications Product Documentation 053-182 - DSE8610 MKII Installation Instructions 057-254 - DSE8610 MKII Operator Manual 057-238 - DSE8610 MKII Configuration Suite PC Manual DEEP SEA ELECTRONICS INDIA Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

DSEGenset® Data SheetDSE8610 MKII Synchronising & Load Sharing Auto Start Control Module Part Number: 8610-02 ‘Second RS485 port available in future update Product Documentation 053-182 - DSE8610 MKII Installation Instructions 057-254 - DSE8610 MKII Operator Manual 057-238 - DSE8610 MKII Configuration Suite PC Manual Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457