*myagriexpo

DSEA109

Product catalog summary

Overview
The DSEA109 Digital Automatic Voltage Regulator (AVR) is engineered to stabilize the output voltage of AC generators. It can be powered by a Permanent Magnet Generator (PMG), stator auxiliary winding, or self-excited from the generator’s main stator windings. Unlike analogue AVRs, the DSEA109 maintains stable voltage output regardless of load changes and temperature variations. It features three-phase generator terminal sensing for enhanced regulation and is easily configured using the DSE Configuration Suite PC Software.

Key Features

LED indicators for fault and operational status.
Onboard DIP switches for configuration selection and stability range adjustment.
Potentiometer adjustments for voltage set points, droop percentage, and stability.
Remote voltage set point adjustment via potentiometer or DC control signal.
Compatible with single and three-phase power sources.
CAN port for J1939 communications, enabling integration with DSE modules for control and monitoring.

Specifications

Power Supply: Self Excited (Shunt), Auxiliary Winding, or PMG; Single or Three Phase; 100 VAC to 270 VAC; 40 Hz to 400 Hz.
Voltage Measurement: Single or Three Phase; 15 VAC to 600 VAC; ±0.5% accuracy.
Droop CT Measurement: Single Phase; 0 A to 5 A; ±0.05 A accuracy.
Remote Bias Inputs: Two inputs; resistive and voltage analogue inputs.
Excitation Output: 0 VDC to 100 VDC continuous; 0 ADC to 7 ADC continuous.

Environmental Standards

EMC: BS EN 61000-6-2, BS EN 61000-6-4.
Safety: BS EN 60950.
Temperature: BS EN 60068-2-1, BS EN 60068-2-2.
Vibration: BS EN 60068-2-6.
Humidity: BS EN 60068-2-30, BS EN 60068-2-78.
Shock: BS EN 60068-2-27.
Protection: BS EN 60529 IP20.

Dimensions and Mounting

Dimensions: 180 mm x 145 mm x 61 mm.
Weight: 0.62 kg.
Mounting: Chassis mounting with four M5 holes.

Contact Information
Deep Sea Electronics Ltd provides contact details for their UK, USA, UAE, and India offices for sales and support inquiries.

Catalog excerpts

DSEGenset® Data Sheet DSEA109 Digital Automatic Voltage Regulator (AVR) with CAN Communications & PMG Support Part Number: A109-01 Overview The DSEA109 Digital Automatic Voltage Regulator (AVR) is designed to regulate the output voltage of an AC generator. The DSEA109 is supplied by either a Permanent Magnet Generator (PMG), stator auxiliary winding or self excited from the generator’s main stator windings (shunt). The DSEA109 eliminates the complexities involved with analogue AVR designs. Analogue AVR designs can be oversensitive to change in temperature which affects the generators output voltage stability, where as the DSEA109 AVR maintains a smooth, stable regulated AC output voltage, regardless of the electrical load connected. The DSEA109 also features 3 phase generator terminal sensing for better regulation. The DSEA109 is simple to install and set up using the DSE Configuration Suite PC Software with the DSE815 configuration interface. On board DIP switches and potentiometers can be used to further adjust the selected configuration and set points within the AVR at a later date by on site maintenance engineers. The DSEA109 has numerous advanced features such as a CAN port providing J1939 communications. This allows the AVR to be connected to supported DSE modules to display AVR instrumentation, and send control commands such as voltage adjustment and configuration selection. In addition to this, the DSEA109 also provides a soft start ramping feature, connection for a droop CT and the ability to perform remote voltage set point adjustment. All of these feature make it perfect for synchronising and loadsharing applications. The DSEA109 AVR is an ideal option for both OEM and retro-fit solutions and is a suitable aftermarket replacement for multiple OEM AVR products. Speak to DSE’s dedicated Technical Support team before placing your order to confirm full compatability. Key Features • LED indication for fault and operating status • On board DIP switch selection for 6 configurations and 2 stability ranges • On board potentiometer adjustment for generator voltage set point, droop percentage, UFRO start frequency, proportional (gain) and integral (stability). • Remote generator voltage set point adjustment using 5 kΩ potentiometer (with open circuit protection) and/or – 10 V to +10 V DC control signal. • Compatible with single phase and 3 phase power supply source supplied from a Self Excited (Shunt), Auxiliary Winding or PMG connection. Single or 3 phase generator terminal voltage sensing Loss of generator terminal voltage sensing protection Under Frequency Roll Off (UFRO) protection with optional instantaneous step. Over excitation protection Optional idle running detection to prevent over excitation Soft ramping of generator terminal voltage to set point on start up. CAN port providing J1939 communication allowing compatible DSE modules to display AVR instrumentation and send control commands for voltage control and stability/configuration selection. Product Documentation 053-245 – DSEA109 Installation Instructions 057-295 – DSEA109 Operator Manual 057-294 - DSEA109 Configuration Suite PC Software Manual DEEP SEA ELECTRONICS UK T: +44 (0) 1723 890099 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS USA T: +1 (815) 316 8706 E: [email protected] W: www.deepseaelectronics.com Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. DEEP SEA ELECTRONICS UAE T: +971 (0) 45910819 E: [email protected] W: www.deepseaelectronics.com Registered in England & Wales No.01319649 VAT No.316923457 DEEP SEA ELECTRONICS INDIA T: +91 20 68195900 E: [email protected] W: www.deepse

Open the catalog to page 1

DSEGenset® Data Sheet DSEA109 Digital Automatic Voltage Regulator (AVR) with CAN Communications & PMG SupportPart Number: A109-01 Specifications Product Documentation 053-245 - DSEA109 Installation Instructions 057-294 - DSEA109 Configuration Suite PC Software Manual DEEP SEA ELECTRONICS USA T: +1 (815) 316 8706 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS UAE T: +971 (0) 45910819 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS INDIA T: +91 20 68195900 E: [email protected] W: www.deepseaelectronics.com Deep...

Open the catalog to page 2

Open the catalog to page 3

DSEGenset® Data SheetDSEA109 Digital Automatic Voltage Regulator (AVR) with CAN Communications & PMG SupportPart Number: A109-01 Environmental Testing Standards Product Documentation 053-245 - DSEA109 Installation Instructions 057-294 - DSEA109 Configuration Suite PC Software Manual DEEP SEA ELECTRONICS USA T: +1 (815) 316 8706 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS UAE T: +971 (0) 45910819 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS INDIA T: +91 20 68195900 E: [email protected] W: www.deepseaelectronics.com...

Open the catalog to page 4

DSEGenset® Data SheetDSEA109 Digital Automatic Voltage Regulator (AVR) with CAN Communications & PMG SupportPart Number: A109-01 Pin Out Description Product Documentation 053-245 - DSEA109 Installation Instructions 057-294 - DSEA109 Configuration Suite PC Software Manual DEEP SEA ELECTRONICS USA T: +1 (815) 316 8706 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS UAE T: +971 (0) 45910819 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS INDIA T: +91 20 68195900 E: [email protected] W: www.deepseaelectronics.com...

Open the catalog to page 5

DSEA109

DSEA109

Catalog excerpts

All Motortech GmbH catalogs and technical brochures