*myagriexpo

DSEG8900

Product catalog summary

Overview
The DSEG8900 is a 7” colour parallel genset controller designed for complex paralleling applications, suitable for both single-set and multi-set configurations. It is equipped with high-end features for diverse application environments.

Key Features

Supports dual module applications: single-set and multi-set.
Offers flexible bus segments and advanced synchronising control.
Includes Advanced Multi-Set Communication (AMSC) with optional redundancy.
Provides shared virtual inputs, outputs, and data via AMSC.
Features advanced PLC functionality with multi-purpose PIDs.
Includes flexible inputs and outputs, with DSENet® expansion support.
Allows PC configuration via DSE Configuration Suite.
Features a 7” high-resolution colour display with application diagrams.
Integrated gasket provides IP65 protection.
Includes RS485 and Ethernet ports supporting Modbus RTU, TCP, and SNMP v2c.
Data logging capability for up to 20 parameters.

Single-Set Controller Features

Single generator and mains synchronising ATS with parallel control.
3-phase generator and mains sensing with protection.
Detects mains failure and decoupling.
Controls load and peak lopping/shaving.
Supports various engine manufacturers' ECU/ECM.
Integrated governor and AVR control.

Multi-Set Controller Features

Synchronises multiple generators and shares load control.
3-phase generator and bus sensing with protection.
Advanced load demand schemes with integrated governor and AVR control.
Includes dead bus synchronising and voltage sequence alarms.

Specifications

DC Supply: 8 V to 35 V DC continuous, with cranking dropouts.
Voltage Measurement: 2 inputs, 3 Phase + Neutral, 15 V to 415 V Phase to Neutral.
Current Transformer Measurement: 5 inputs, 3 Phase with Earth Fault.
Analogue Inputs: 7 inputs, various types including resistive and current.
Digital Inputs: 9 negative switching inputs.
Analogue Outputs: 2 outputs for governor and AVR control.
Digital Outputs: 12 outputs, including volt-free contacts.
Communications: USB, RS485, Ethernet, and CAN ports.
Temperature Range: Operating: -30 °C to +70 °C, Storage: -40 °C to +85 °C.
Dimensions: 305 mm x 161 mm x 45.2 mm.

Environmental Testing Standards

EMC: BS EN 61000-6-2 and BS EN 61000-6-4.
Electrical Safety: BS EN 61010.
Temperature: BS EN 60068-2-1 and BS EN 60068-2-2.
Vibration: BS EN 60068-2-6.
Humidity: BS EN 60068-2-30 and BS EN 60068-2-78.
Shock: BS EN 60068-2-27.
Protection: BS EN 60529 IP65.

Pin Descriptions

DC Supply: Pins 1 to 2
Emergency Stop: Pin 3
Fuel and Start: Pins 4 and 5
Charge Alternator: Pin 6
Digital Outputs: Pins 7 to 14
Analogue Inputs: Pins 15 to 19
Magnetic Pick-Up: Pins 23 to 25
Engine ECU/ECM: Pins 26 to 28
DSENet®: Pins 29 to 31
Governor Control: Pins 35 to 36
AVR Control: Pins 38 to 39
Volt Free Outputs: Normally Closed (Pins 40 to 41), Normally Open (Pins 42 to 43)
Voltage Sensing: Generator (Pins 44 to 47), Mains (Pins 48 to 51)
Current Sensing: Generator (Pins 52 to 56), Mains (Pins 57 to 58)
Digital Inputs: Pins 59 to 67
Analogue Inputs: Pins 68 to 70 & 77
RS485: 2 x RS485 (Pins 71 to 76)

Product Documentation

Installation Instructions: Document 053-258
Operator Manual: Document 057-343
Configuration Suite PC Manual: Document 057-340

Technical Drawing
The document includes a technical drawing with dimensions for the controller, highlighting the connection label and physical size.

Contact Information
Contact details for Deep Sea Electronics offices in the UK, USA, UAE, and India are provided for sales and support inquiries.

Note
Deep Sea Electronics reserves the right to change product details without prior notice, emphasizing the document is for guidance only.

Catalog excerpts

Series Data Sheet DSEG8900 7” Colour Parallel Genset Controller Part Number: G8900-01 Overview The DSEG8900 is a 7” colour parallel genset controller designed for complex paralleling applications. The DSEG8900 can be configured to provide single-set and multi-set paralleling on a single site and provides a wide range of high-end features for multiple application environments. Key Features • 2 module applications in one product (single-set and multi-set) • Flexible bus segments • Slip sync and sync (phase) lock synchronising control • Advanced multi-set communication (AMSC) link with optional redundancy • Shared virtual inputs, outputs and data via AMSC • Advanced PLC functionality including multi-purpose PIDs • Flexible inputs and outputs • DSENet® expansion support • PC configuration using DSE Configuration Suite • Multiple language support • Enhanced 7” high resolution colour display with on screen application diagrams • Integrated gasket (IP65 protection) • 2 integrated RS485 ports providing Modbus RTU support • Integrated Ethernet port providing Modbus TCP and SNMP v2c support • Data logging of up to 20 parameters • Manual front panel and automatic control modes Product Documentation 053-258 – DSEG8900 Installation Instructions 057-343 – DSEG8900 Operator Manual 057-340 – DSEG8900 Configuration Suite PC Manual DEEP SEA ELECTRONICS UK T: +44 (0) 1723 890099 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS USA T: +1 (815) 316 8706 E: [email protected] W: www.deepseaelectronics.com Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. DEEP SEA ELECTRONICS UAE T: +971 (0) 45910819 E: [email protected] W: www.deepseaelectronics.com Registered in England & Wales No.01319649 VAT No.316923457 DEEP SEA ELECTRONICS INDIA T: +91 20 68195900 E: [email protected] W: ww

Open the catalog to page 1

Series Data Sheet DSEG8900 7” Colour Parallel Genset Controller Part Number: G8900-01 Single-Set Controller Key Features • Single generator, single mains (utility), synchronising ATS with short / long-term parallel control • 3 phase generator and mains (utility) sensing with protection • Mains (utility) failure detection including mains (utility) decoupling detection • Based load and peak lopping / shaving control • Latest ECU / ECM support for a wide range of engine manufacturers • Integrated governor and AVR control • Mains (utility) and generator positive, negative and zero voltage sequence...

Open the catalog to page 2

Series Data Sheet DSEG8900 7” Colour Parallel Genset ControllerPart Number: G8900-01 Specifications Product Documentation 053-258 - DSEG8900 Installation Instructions 057-340 - DSEG8900 Configuration Suite PC Manual DEEP SEA ELECTRONICS UK T: +44 (0) 1723 890099 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS USA T: +1 (815) 316 8706 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS UAE T: +971 (0) 45910819 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS INDIA T: +91 20 68195900 E: [email protected]...

Open the catalog to page 3

Series Data Sheet DSEG8900 7” Colour Parallel Genset ControllerPart Number: G8900-01 Specifications Product Documentation 053-258 - DSEG8900 Installation Instructions 057-340 - DSEG8900 Configuration Suite PC Manual DEEP SEA ELECTRONICS INDIA Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

Open the catalog to page 4

Series Data Sheet DSEG8900 7” Colour Parallel Genset ControllerPart Number: G8900-01 Specifications Product Documentation 053-258 - DSEG8900 Installation Instructions 057-340 - DSEG8900 Configuration Suite PC Manual DEEP SEA ELECTRONICS INDIA Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

Open the catalog to page 5

Open the catalog to page 6

Series Data Sheet DSEG8900 7” Colour Parallel Genset ControllerPart Number: G8900-01 Related Products Product Documentation 053-258 - DSEG8900 Installation Instructions 057-340 - DSEG8900 Configuration Suite PC Manual DEEP SEA ELECTRONICS INDIA Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

Open the catalog to page 7

Series Data Sheet DSEG8900 7” Colour Parallel Genset ControllerPart Number: G8900-01 Environmental Testing Standards Product Documentation 053-258 - DSEG8900 Installation Instructions 057-340 - DSEG8900 Configuration Suite PC Manual DEEP SEA ELECTRONICS UK T: +44 (0) 1723 890099 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS USA T: +1 (815) 316 8706 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS UAE T: +971 (0) 45910819 E: [email protected] W: www.deepseaelectronics.com DEEP SEA ELECTRONICS INDIA T: +91 20...

Open the catalog to page 8

DSEG8900

DSEG8900

Catalog excerpts

All Motortech GmbH catalogs and technical brochures