*myagriexpo

Speed Wedge MKII

Product catalog summary

Overview: The Speed Wedge MKII is a Doppler Radar Sensor designed for precise non-contact measurement of true ground speed, unaffected by wheel or drive slip. It is suitable for various applications including indoor vehicles, mobile machines, conveyor belts, and material flow.

Specifications:

Power Supply: 9 to 28 V DC
Current Consumption: Less than 200 mA
Temperature Range: Storage: -40 °C to +85 °C; Operation: -40 °C to +70 °C
Frequency & Power: 24.15 GHz to 24.25 GHz at 12.7 dBm EIRP
Output Signal: 130 Pulses/m (36.1 Hz km-1 h-1) according to DIN 9684 / ISO 11786 and RS232
Dynamics: 20 Hz Update Rate
Speed Range: 0.8 km/h up to 90 km/h
Sensor Configuration: One Radar Frontend
Dimensions: 110 mm x 55 mm x 45 mm (LxWxH, excluding cable)
Connector: DIN M12 male plug
Mounting: Base plate parallel to measurement object, Distance 100 to 700 mm
Warranty: 2 Years
Environmental Protection: IP6KX, IPX7, IPX9K according to ISO 20653

Benefits:

Provides precise measurement of true ground speed independent of wheel slip, effective tire circumference, and wheel sinking.
Offers high dynamics for monitoring, control, and closed-loop control.
Unaffected by varying surface properties.
Pulse output adheres to industry standards DIN 9684 / ISO 11786.

Technical Data: The sensor is built in a small, rugged, completely sealed casing, suitable for demanding environments.

Contact Information: MSO Meßtechnik und Ortung GmbH, Hohweg 8 - 10, 53902 Bad Münstereifel - Wald, Germany. Tel.: +49 2257 95 92 090, Fax: +49 2257 95 92 091, e-mail: [email protected]

Note: Errors and omissions excepted, technical details are subject to change without notice.

Catalog excerpts

Speed Wedge MKII Radar Sensor for true ground speed measurement Speed Wedge MKII is a Doppler Radar Sensor for precise non-contact measurement of true ground speed regardless of wheel / drive slip. in-door vehicles mobile machines conveyor belts material flo

Open the catalog to page 1

Speed Wedge MKII Speed Wedge MKII is a Doppler Radar Sensor for measurement of true ground speed of vehicles, machines or objects moving relative to the Sensor. For demanding environments the sensor is built in a small, rugged completely sealed casing. Benefits · Precise measurement of the true ground speed independent on wheel slip, effective tyre circumference and sinking in of the wheel · High dynamics for monitoring, control and closed-loop control · Unsusceptible to varying properties of the surface being measured · Pulse Output according to industry standard DIN 9684 / ISO 11786 Power supply:...

Open the catalog to page 2

Speed Wedge MKII

Speed Wedge MKII

Catalog excerpts

All MSO Messtechnik und Ortung GmbH catalogs and technical brochures