*myagriexpo

Speed Wedge MKII

Product catalog summary

Overview
Speed Wedge MKII is a Doppler Radar Sensor designed for precise non-contact measurement of true ground speed, unaffected by wheel or drive slip. It is suitable for various applications including indoor vehicles, mobile machines, conveyor belts, and material flow systems.

Applications

Indoor vehicles
Mobile machines
Conveyor belts
Material flow systems

Benefits

Accurate measurement of true ground speed independent of wheel slip and tyre conditions.
High dynamics suitable for monitoring and control systems.
Resistant to varying surface properties.
Pulse output compliant with industry standards DIN 9684 / ISO 11786.

Technical Specifications

Power Supply: 9 to 28 V DC
Current Consumption: < 200 mA
Temperature Range: Storage: -40 °C to +85 °C, Operation: -40 °C to +70 °C
Frequency & Power: 24.15 GHz to 24.25 GHz at 12.7 dBm EIRP
Output Signal: 130 Pulses/m (36.1 Hz km^-1 h^-1) according to DIN 9684 / ISO 11786 and RS-232
Dynamics: 20 Hz Update Rate
Speed Range: 0.8 km/h up to 200 km/h
Sensor Configuration: One Radar Frontend
Dimensions: 110 mm x 55 mm x 45 mm (LxWxH, less cable)
Connector: DIN M12 male plug
Mounting: Base plate parallel to measurement object, Distance 100 to 700 mm
Warranty: 2 Years
Environmental Protection: IP6KX, IPX7, IPX9K according to ISO 20653

Contact Information
MSO Meßtechnik und Ortung GmbH, Hohweg 8 - 10, 53902 Bad Münstereifel - Wald, Tel.: +49 2257 95 92 090, Fax: +49 2257 95 92 091, Email: [email protected], Website: www.mso-technik.de

Note: Specifications are subject to change without notice. Errors and omissions excepted as of 20.12.2022.

Catalog excerpts

Radar Sensor for true ground speed measurement Applications e.g.: • in-door vehicles • mobile machines • conveyor belts • material flow Speed Wedge MKII is a Doppler Radar Sensor for precise non-contact measurement of true ground speed regardless of wheel / drive slip. Unsusceptible against varying properties of the ground surface.

Open the catalog to page 1

Speed Wedge MKII Speed Wedge MKII is a Doppler Radar Sensor for measurement of true ground speed of vehicles, machines or objects moving relative to the Sensor. The forward speed of e.g. an indoor transportation vehicle, fork lift, conveyor belt, offhighway vehicle and rail applications is measured contactless thus unsusceptible to wheel / drive slip, effective tyre circumference and sinking in of the tyre. For demanding environments the sensor is built in a small, rugged completely sealed casing. Benefits · Precise measurement of the true ground speed independent on wheel slip, effective tyre...

Open the catalog to page 2

Speed Wedge MKII

Speed Wedge MKII

Catalog excerpts

All MSO Meßtechnik und Ortung GmbH catalogs and technical brochures