Plant Protection
20Pages

mE mULLER ELEKTRONIK A TRIMBLE COMPANY

Function Overview Application rate monitoring Application rate regulation Function overview ISOBUS SPRAYER-Controller Hydraulic functions Trip and total counter Task Management (ISOBUS-TC) ISOBUS system Working with prescription maps Fill level sensor(TANK-Control) 14 Filling, rinsing and stirrer control(TANK-Control III) Drawbar and stub axle steering(TRAIL-Control) Boom height control system(DISTANCE-Control) Boom height control system(DISTANCE-Control II) Section control (SECTION-Control) All information about the company and the products can be found here: Single nozzle switching...

SPRAYDOS long SPRAYDOS short

ISOBUS SPRAYER-Controller The ISOBUS SPRAYER-Controller is setting new standards in the area of sprayer control systems. Depending on the implement equipment, the systems can be extended with an additional job computer. The assignment can be configured individually. The standard configuration of the ISOBUS SPRAYERController has 9 sections and up to 5 hydraulic functions. The system can be extended to include up to 8 MIDI job computers. Functions With their individual configuration options, the MIDI 3.0 job computer can be adapted to virtually any sprayer functionality: - Application rate...

The user interface is modern, intuitive, and fits seamlessly in the ME family. The implement types, displays and colours can be adjusted according to the manufacturer's requirements. All icons and controls can also be positioned individually on the screens. Profile of a trailed sprayer Profile of a mounted sprayer Display of the special functions menu level. Functions that are already activated are shown as icons on the screen: Display of the boom folding menu level: - Fold and unfold inner boom sections - Fold and unfold outer boom sections - Lift and lower the boom Working lights - Slope...

TANK-Control The TANK-Control fill level measuring system enables the precise display of the tank content for sprayers, and also automatic fill stop when reaching a previously set quantity. The measured values, i.e. the tank content, can be read both on the TANK-Control display on the sprayer tank and on the terminal in the tractor. It is primarily intended for use with liquid fertilizers and in crop protection. The sensor works with all liquid solutions, even at specific densities different from that of water. Fill level sensor Functions Magnetic field-dependant sensors are installed inside a...

TANK-Control III TANK-Control III is a system for controlling electric valves and enables the integration and regulation of stirrers and rinsing processes for sprayers. Moreover, twoTANK-Control sensors can be connected for measuring the tank content and for the fill stop. TANK-Control III is an ISOBUS application that is either part of the SPRAYER-Controller or used as a separate job computer. The TANK-Control III terminal also complies with environmental protection classes IP69 (acc. to DIN EN 60529) and offers a high contrast 4.3" colour display. It is therefore ideal for outdoor use and...

DISTANCE-Control I and II With DISTANCE-Control, Müller-Elektronik offers a distance regulation system for field sprayer booms. Ultrasonic sensors measure the distance from the plant canopy, which is then controlled by the sprayer hydraulic system. Depending on the boom design and hydraulic equipment, either DISTANCE-Control I or DISTANCE-Control II is used. is capable of regulating the boom height and the boom slope. The system consists of at least two ultrasonic sensors, one slope sensor and an angle sensor. It is controlled using the standard hydraulic system. The slope can also be...

ISOBUS TRAIL-Control ISOBUS TRAIL-Control ensures automatic tracking of trailed implements (with folding drawbar or stub axle steering) in the tractor track. The implement can also be driven offset to the tractor (crab steering) both on slopes and on level terrain. ISOBUS TRAIL-Control therefore reduces crop damage and increases yields. ISOBUS TRAIL-Control is available as a stand-alone ISOBUS version as well as integrated into the ISOBUS sprayer application. Functions A sensor on the tractor and a sensor on the three-point hitch of the machine steering determine the actual status of the...

SECTION-Control TOP SECTION-Control TOP is the single nozzle control system manufactured by Müller-Elektronik. With this solution, it is not only possible to control each section, but also each nozzle can be individually and precisely switched on and off through GPS control. This increases the efficacy, reduces overlaps to a minimum, and makes a significant contribution to reducing costs and protecting the environment. Another great advantage of SECTION-Control TOP is the combination with VARIO-Select. This combination enables the largest possible application range or higher working speeds at...

From section control through individual nozzle switching all the way to VARIO-Select Individual nozzle switching with VARIO-Select VARIO-Select VARIO-Select enables fully automatic switching and optimum control during application with bigger or smaller nozzles or nozzle combinations, and constant pressure adjustment for infinitely variable adaptation of the application rate (e.g. 50 – 600 l/ha) to site-specific target rates (e.g. UAN, growth regulators). Further- more, VARIO-Select guarantees both a constant application rate (l/ha) and a uniform drop size with greater variability of the...

MULTI-Control Modern agricultural implements are becoming increasingly complex. Seeders apply seed and fertilizers simultaneously in one operation, and fertilizer spreaders are capable of applying up to four individual nutrients in one field pass. Sprayers with two booms and the corresponding circulation systems for different substances must be regulated by only one terminal. With MULTI-Control by Müller-Elektronik, this complexity is now possible with all TOUCH terminals. To achieve this, the ISOBUS Task Controller was extended with the various MULTI-Control functions through special...