Series CF-13
6Pages

Product Information A. u. K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: info@akmueller.de Internet: www.akmueller.de Characteristics Water distribution and merge of medium paths Applicable for hot water Easy installation due to manually releasable swivel nut Nominal orifice DN 13 for high throughput, whilst maintaining minimal pressure losses Long term performance capability Optional with strainer, flow regulator or check valves Description Manifolds with nominal orifices of DN 13, for flexible realization of water paths. Whether you build the components into a new design or retrofit it into existing equipment, sufficient installation space assumed, it provides a simple method of adding new media paths or connection possibilities for components such as valves, push-fit connectors or outlet nozzles. The manifolds are ideally suitable for virtually any type of water distribution or merger. The standard connection thread sizes allow integration into numerous applications. Installation is made easy by manually releasable swivel nuts. The internal diameter of the manifolds with Ø 13 mm ensures a high throughput, whilst maintaining minimal pressure losses. Optionally the integration of strainer, flow regulators or check valves is possible. Various outlet accessories. Hot / cold drink dispensers Industrial appliances Cleaning systems Washing machines Dish washers Agricultural implements Automatic car washing systems Approved versions available on request: KTW - BWGL System 1+ NSF 61 WRAS (65 °C) Others on request Technical Data Type Fitting position cold and heated potable water and physically and chemically similar media Valve body PA 66 glass fibre reinforced p-Operating / PN 0 - 10 (0 - 145 Hydraulic strength (Burst pressur)* Leakage test* *Type testing in accordance with DIN EN IEC 60730-2-8 © copyright A.u.K. Müller, subject to changes witho

Product Information Manifolds DN 13  Series CF-13 Assembly Instruction for Swivel Nuts In order to avoid damage to the swivel nuts or leaks in the screw connections, please follow these assembly instructions. ● Place the swivel nut straight onto the thread of the male counterpart. ● Make sure that the metal ring is well seated in the area of the toothing. ● Tighten the swivel nut to a torque of 3 Nm. ● Check the installation for leaks. ● Repeat the leakage check at suitable intervals. ● Only use original seals and spare parts from A. u. K. Müller. © copyright A.u.K. Müller, subject to...

Product Information Options for G 3/4 male thread of CF-13 components. Strainers Mesh size [mm] Stainless steel Nominal flow rate from - to [l/min] 5,0 - 20,0 Flow regulators Material D Check valves Material G Please clarify the applicability and approvals of each aforemetioned component with us. Flange as mounting support (Please see separate datasheet also) * = contains BPA © copyright A.u.K. Müller, subject to changes without prior notice

Product Information Manifolds DN 13  Accessories: CF-H Threaded Nozzles Accessories: CF-H Nozzles Technical Data Spout and step reducer PA 6/6 glass fibre reinforced connector fitting straight connector (0°) elbow connector (90°) Fitting position cold and heated potable water and physically and chemically similar media PA 66 glass fibre reinforced The outlet nozzles are available with different spouts, with and without a ribbing contour. The ribbing of the connecting pieces ensures a secure fit of the connected hose. according to EN 61770 when using suitable hoses However, an additional...

Product Information Options Inlet Outlet Connection © copyright A.u.K. Müller, subject to changes without prior notice

Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany Tel.: Fax: e-mail: info@akmueller.de Internet: www.akmueller.de © copyright A.u.K. Müller, subject to changes without prior noti