Product Information A. u. K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: [email protected] Internet: www.akmueller.de Characteristics Water distribution and merge of medium paths Applicable for hot water of 90 °C Easy installation due to manually releasable swivel nut Nominal orifice DN 17 for high throughput, whilst maintaining minimal pressure losses Long term performance capability Optional with strainer, flow regulator or check valves Applications Description Manifolds with nominal orifices of DN 17 for flexible realization of water paths. Whether you build the components into a new design or retrofit it into existing equipment, sufficient installation space assumed, it provides a simple method of adding new media paths or connection possibilities for components such as valves, push-fit connectors or outlet nozzles. Hot / cold drink dispensers Industrial appliances Cleaning systems Washing machines Dish washers Agricultural implements Automatic car washing systems Approved versions available on request: KTW - BWGL NSF 61 ACS WRAS Others on request Technical Data The internal diameter of the manifolds with Ø 17 mm ensures a high throughput, whilst maintaining minimal pressure losses. Optionally the integration of strainer, flow regulators or check valves is possible. Various outlet accessories. PA 6/6 glass fibre reinforced Fitting position The manifolds with three or four connectors are ideally suitable for virtually any type of water distribution or merger. The standard connection thread sizes allow integration into numerous applications. Installation is made easy by manually releasable swivel nuts. cold and heated potable water and physically and chemically similar media Hydraulic strength (Burst pressur)* Leakage test* *Type testing in accordance with DIN EN IEC 60730-2-8 © copyright A.u.K. Müller, subject to changes wit

Product Information Manifolds DN 17  Assembly Instruction for Swivel Nuts In order to avoid damage to the swivel nuts or leaks in the screw connections, please follow these assembly instructions. ● Place the swivel nut straight onto the thread of the male counterpart. ● Make sure that the metal ring is well seated in the area of the toothing. ● Tighten the swivel nut to a torque of 3 Nm. ● Check the installation for leaks. ● Repeat the leakage check at suitable intervals. ● Only use original seals and spare parts from A. u. K. Müller. CF-17 L: Angular Piece, Manifolds DN17 Other connectors on...

Product Information CF-17 L: Angular Piece, Manifolds DN17 © copyright A.u.K. Müller, subject to changes without prior notice

Product Information Manifolds DN 17  © copyright A.u.K. Müller, subject to changes without prior notice

Product Information © copyright A.u.K. Müller, subject to changes without prior notice

Product Information Manifolds DN 17  CF-17 2MFC: Dual Distribution, Manifolds DN17 Options Connection Depending on the pitch the manifolds are for example compatible to the following A. u. K. Müller servo-controlled valve series: Pitch One-chamber valve (without flange) One-chamber valve (without flange) One-chamber valve (without flange) 1-, 2-, 3-, 4- chamber valve (with flange) 1-, 2- chamber valve (with flange) One-chamber valve (with flange) One-chamber valve (with flange) © copyright A.u.K. Müller, subject to changes without prior n

Product Information CF-17 2MFC: Dual Distribution, Manifolds DN17 Options Connection Depending on the pitch the manifolds are for example compatible to the following A. u. K. Müller servo-controlled valve series: Pitch One-chamber valve (without flange) One-chamber valve (without flange) One-chamber valve (without flange) 1-, 2-, 3-, 4- chamber valve (with flange) 1-, 2- chamber valve (with flange) One-chamber valve (with flange) One-chamber valve (with flange) © copyright A.u.K. Müller, subject to changes without prior notice

Product Information Manifolds DN 17  CF-17 2MFC: Dual Distribution, Manifolds DN17 closed left-hand thread Options Connection Depending on the pitch the manifolds are for example compatible to the following A. u. K. Müller servo-controlled valve series: Pitch One-chamber valve (without flange) One-chamber valve (without flange) One-chamber valve (without flange) 1-, 2-, 3-, 4- chamber valve (with flange) 1-, 2- chamber valve (with flange) One-chamber valve (with flange) One-chamber valve (with flange) © copyright A.u.K. Müller, subject to changes without prior n

Product Information CF-17 2MFO: Dual Distribution, Manifolds DN17 Depending on the pitch the manifolds are for example compatible to the following A. u. K. Müller servo-controlled valve series: Pitch One-chamber valve (without flange) One-chamber valve (without flange) One-chamber valve (without flange) 1-, 2-, 3-, 4- chamber valve (with flange) 1-, 2- chamber valve (with flange) One-chamber valve (with flange) One-chamber valve (with flange) © copyright A.u.K. Müller, subject to changes without prior notice

Product Information Manifolds DN 17  CF-17 3MFC: Triple Distribution, Manifolds DN17 Depending on the pitch the manifolds are for example compatible to the following A. u. K. Müller servo-controlled valve series: Pitch One-chamber valve (without flange) One-chamber valve (without flange) One-chamber valve (without flange) 1-, 2-, 3-, 4- chamber valve (with flange) 1-, 2- chamber valve (with flange) One-chamber valve (with flange) One-chamber valve (with flange) © copyright A.u.K. Müller, subject to changes without prior

Product Information CF-17 3MFC: Triple Distribution, Manifolds DN17 Options Connection Depending on the pitch the manifolds are for example compatible to the following A. u. K. Müller servo-controlled valve series: Pitch One-chamber valve (without flange) One-chamber valve (without flange) One-chamber valve (without flange) 1-, 2-, 3-, 4- chamber valve (with flange) 1-, 2- chamber valve (with flange) One-chamber valve (with flange) One-chamber valve (with flange) © copyright A.u.K. Müller, subject to changes without prior notice