High Torque Series Clamps XH Series – 5/8” wide band
1Pages

Add to favorites

{{requestButtons}}

Catalog excerpts

YOU GET MORE WITH MURRAY High Torque Series Clamps XH Series – 5/8” wide band Heavy Duty Worm Gear Clamp • Available in all 300 series stainless steel, all 304 stainless steel, and all 316 stainless steel with 5/8” band width. • Screw is longer and has a larger diameter than standard Worm Drive clamps to provide strength under load and to increase the number of threads engaged with the band. This produces a clamp that can withstand higher loads. • Band material is slightly thicker allowing for higher tensile strength providing a stronger clamp capable of producing higher torque ratings. • Ultimate torque is a minimum of 100 in lbs, or 11.3 Nm. • Recommended Installation Torque is 75 in lbs or 8.5 Nm. SIZES AVAILABLE • Suitable for applications where a heavier duty clamp is necessary. UPON REQUEST • Other material grades may be available upon request. "A" Diameter Range 300 Series SS Murray Corporation 260 Schilling Circle Hunt Valley, MD, 21031, USA

Open the catalog to page 1

All Murray Corporation catalogs and technical brochures

1. 

   Keystone Pinch Clamp (Mechanical)- SAE Type “J” KSC

   1 Pages

2. 

   Barrel Hardware Clamps- BH

   1 Pages

3. 

   EXT Series Exhaust Clamp

   1 Pages

4. 

   Pinch Clamp (Welded) –SAE Type “J” KS

   1 Pages

5. 

   General Purpose Worm Drive Clamps - Gold Seal®

   1 Pages

6. 

   MURRAY CAPABILITIES

   1 Pages

7. 

   Seamless Pinch Clamps (KVGT)

   1 Pages

8. 

   Embossed Non-Perforated Worm Gear Clamps

   1 Pages

9. 

   Type “F” Quick Release Clamp

   1 Pages

10. 

    Heavy-Duty T-Bolt Clamps – Type TBA and TBB

    1 Pages

11. 

    T-Bolt Clamps - SAE Type “TB"

    1 Pages