Catalogs >
Mysilo (Siloport) >
FLAT BOTTOM SILO (F MODEL)

FLAT BOTTOM SILO (F MODEL)
1 / 2Pages

Catalog excerpts

FLAT BOTTOM SILO ( F MODEL ) Our Flat Bottom F model silos have a capacity of 38.736 m ³ in a range of 4.58 m to 41.25 m diameters and a maximum height of 40 rings. The designs of our silos are made in accordance with the grain storage loads in ASABE 2008 EP433 standards. In addition to the silo design in accordance with the American (ASAE) norm as standard, silos in accordance with the DIN and EUROCODE norms are also designed as options. In order to fulfil the requirements of our customers, the design of our silos can be made specifically for wind, snow and seismic loads according to the conditions of the region where they will be installed. PRODUCT FEATURES Silo walls, that are made of S350 quality galvanized sheet, are the narrowest corrugated sheets (65mm) and have stronger resistance. A total of 350 gr/m² and 600 gr/m² galvanized sheet is used on both surfaces for the exposure of humidity or natural events such as wind and sandstorm to which the area where the silo will be installed. With these features, it provides great advantage against its competitors. OPTIONAL EQUIPMENTS: - Roof Ladder L Type Roof Ladder LB Type Roof Ladder BB Type Roof Eaves Platform Roof Eaves Railing Roof Z-Ring Railing Roof Door Inside Ladder Outer Ladder Spiral Stairs Silo Door (I Model) Insulation Ground Wall Anchorage Silo Entrance Door Aeration Vent Exhaust Fan Temperature Monitoring Temperature and Moisture Monitoring Two-Ring Door - Level Sensor - Outer Ladder Safety Door - Occupational Safety Equipment

Open the catalog to page 1

FLAT BOTTOM SILO ( F MODEL ) WALL SHEET Heat and cold-resistant strip mastics, used in the joints of wall sheets, ensure perfect sealing in all types of climates. The World’s Narrowest Corrugated Wall Sheet Narrow Corrugated Wall Sheet Wide Corrugated Wall Sheet Roof beams designed from C profile have a higher load bearing capacity against their competitors. Special designs can be made according to different snow load and peak load requirements. The overlapping trapezoid pitch of the roof panels is designed at a depth of 75 mm with 7 bends. It has a stronger structure than its precedents....

Open the catalog to page 2

FLAT BOTTOM SILO (F MODEL) 1 / 2Pages

Catalog excerpts

All Mysilo (Siloport) catalogs and technical brochures

FLAT BOTTOM SILO (F MODEL)
1 / 2Pages