SD SPRINKLERS
8Pages

S ‫ ‏‬D SPRINKLERS The new generation of sprinklers BEST SINGLE NOZZLE SPRINKLER IN THE WORLD I MAXIMUM COVERAGE WITH HIGH UNIFORMITY UNIFORMITY IN WINDY CONDITIONS I LESS SENSITIVE TO CLOGGING

INTRODUCTION • New & innovative concept based on unique hammer with SD (Super Diffuser) plate, designed for uniform distribution • SD sprinkler is designed to work even with low pressure • The hydrodynamic design of the nozzle and special arc water passage facilitate wider radius of throw, which reduces the number of sprinklers required per unit area • SD sprinklers are less sensitive to clogging and have higher resistance to wind Plastic protection cap protects the spring from sand, frost gives longer life to sprinkler Unique hammer with SD (super-diffuser) plate design for uniform...

Applications • Recommended for closely spaced field crops, such as potato, leafy vegetables, cotton, oil seeds, pulses, cereals and fodder crops • Irrigation and germination of vegetables, flowers and nursery crops Features and benefits I.Unique hammer with SD (Super Diffuser) provides perfect uniformity of distribution. The SD mechanism ensures enough water closer to the sprinkler, even at low pressure. 2.High distribution uniformity within the irrigated pattern (6025 SD single nozzle 3.0 mm (585 lph) at 2.5 bar 12 X 12 m) 3.Low droplet impact and low application rate ensure better...

4. D sprinklers are less sensitive to clogging S 5. D sprinklers have higher resistance to wind S 6. ptional O SD sprinklers can be combined with LPD (Leakage Prevention Device) under the sprinkler to maintain a full irrigation system: • Allows immediate operation of the whole system • Prevents drainage and damage to the soil structure • Provides uniform irrigation, especially for germination purposes (short cycles) • Saves w

5022 SD–U adaptor + FR housing flow regulator • Plastic impact sprinkler, 1/2” male or 3/4” female • Mounted on IrriStand 52 or 53 • Low working pressure: 2.0 bar • Low flow rate: up to 800 lph • High distribution uniformity, up to 12 m quick connector 8 mm drill or punch hole FOR MEDIUM AND HIGH FLOW RATE • Plastic impact sprinkler, 1/2” male or 3/4” female • Mounted on riser • Medium and high flow rate: 760-1680 lph • High distribution

special arc water pass for wider radius of throw Amirit • Plastic impact sprinkler, 1/2” male or 3/4” female • Mounted on riser • Special arc structure for maximum range of throw • Medium and high flow rate: 540-1270 lph • High distribution uniformity: up to 16

5035 SD • Plastic impact sprinkler, 3/4” male single or dual nozzles • Medium and high flow rate: 0.790-3.540 m3/h • High distribution uniformity: up to 20 m 5035 SD PC • Part circle plastic impact sprinkler 3/4” male • For irrigation of edges in various field crops • Wide diameter of throw up to 34 m • Working pressure range: 2.5-5.0 bar SD hammer improves the distribution profile 10.00

© 2012 NaanDanJain Ltd. All rights reserved. All specifications are subject to change without notice. NaanDanJain Irrigation (C.S.) Ltd. Post Naan 76829, Israel. T:+972-8-9442180, F:+972-8-9442190 E: mkt@naandanjain.com www.naandanjain.com