low loaders
8Pages

{{requestButtons}}

Catalog excerpts

low loaders - 2

Single Axle • 6T payload • 50mm softwood sheeted floor • Spring assisted ramps as standard • Lockable steel toolbox • Durbar sheeted beavertail with grip bars • Standard 700mm (2`4” wide) ramps • Steel strap ramp supports • Rope hooks and chime bars standard • Galvanised drawbar boot & toolbox door. • Hydraulic Brakes • Park brake • LED lights to rear • Fixed drawbar • Hose Stowage • Fixed towing E

Open the catalog to page 2
low loaders - 3

Tandem Axle • Up to 16T payload • 50mm softwood sheet floor • Spring assist ramps as standard • Lockable steel toolbox • Durbar sheeted beavertail with grip bars • Standard 700mm (2`4” wide) ramps • Steel strap ramp supports • Rope hooks and chime bars standard • Galvanised drawbar boot & toolbox door. • Hydraulic Brakes • Park brake • LED lights to rear including number plate light • Sprung drawbar standard • Hose Stowage • Fixed towing Eye • 215/75/17.5 Twin Wh

Open the catalog to page 3
low loaders - 4

Tridem Axle • GVW up to 33T • 50mm softwood sheet floor • Spring assist ramps as standard • Lockable steel toolbox • Durbar sheeted beavertail with grip bars • Standard 700mm (2`4” wide) ramps • Steel strap ramp supports • Rope hooks and chime bars standard • Galvanised drawbar boot & toolbox door. • Hydraulic Brakes • Park brake • LED lights to rear including number plate • Sprung drawbar • Hose Stowage • Fixed towing E

Open the catalog to page 4
low loaders - 5

Agri Forestry • 27T gross weight (3 axle) • 35T gross weight (4 axle) • Optional 32T gross version (3 axle) • Heavy duty wheel arches c/w grip bars • Hydraulic brakes • Full LED road lights • Fixed towing eye • Front & rear loading ramps • Chime bar tie points • Plated H-Beam fabricated chassis

Open the catalog to page 5
low loaders - 6

Forestry trailer Single Axle Tandem Axle 4- Axle (not for use on public roads in the EU) Height With Ramps (H) 2.01m Brakes Drawbar Slack (Hydraulic) Adjusters Fabricated chassis Fabricated chassis 100mm 8 Stud c/w Rear Steer 100mm 8 Stud c/w 3rd &4th Axles Steering Please note: Imperial dimensions are rounded to the nearest foot or inch Floor Max height Length (E) (F) Tridem Axle Bed size Beavertail Beavertail Ramps Ramp (includes (B) Angle (C) (spring Angl

Open the catalog to page 6
low loaders - 7

Bolt-On Bale Wedge (Cheese Wedge) Wedge Ramp Track Guides Floor Hook Headboard Outrigger Storage Tray Durbar Sheeted ramps Mantis Ramps Pull out marker board Hydraulic Jack Forestry outriggers Swing Outriggers Rear steering axle

Open the catalog to page 7
low loaders - 8

Common Options BRAKES Dual Air/Hydraulic Brakes Air only brakes Load sensing air or Hydraulic Cable Operated breakaway system NC Electric Operated breakaway system ABS complete with Susie Automatic Slack Adjusters SUSPENSION Air suspension c/w raise/lower valve Fabricated chassis WHEELS Various wheel alternatives available AXLES 8 stud high speed 10 stud high speed FLOOR Longer Bed Hardwood floor Floor Hooks Flatbed with no Beavertail or ramps (same overall length) 1.35m Wide bucket well in tail OUTRIGGERS Swing out outriggers on bed or beavertail Outrigger Storage Tray c/w Boards Pull out...

Open the catalog to page 8

All NC Engineering Ltd. catalogs and technical brochures

  1. site dumper

    2 Pages

  2. slurry mixer

    12 Pages

  3. dump trailer

    12 Pages

  4. Low Loaders

    8 Pages

  5. HT1.0

    1 Pages

  6. HT1.5

    1 Pages

  7. SW3

    1 Pages

  8. ST3

    1 Pages

  9. SW4.5

    1 Pages

  10. SW6

    1 Pages

  11. ST 9

    1 Pages

  12. ST10

    1 Pages

  13. Dump Trailer

    12 Pages

  14. Link a sweep

    1 Pages

  15. Slurry Tankers

    16 Pages

  16. Slurry Mixers

    12 Pages

  17. Sweepers

    1 Pages

  18. ST190

    1 Pages

  19. Telehandler

    8 Pages