video corpo

A3030 ACCELERATOR
1 /2Pages

A3030 ACCELERATOR

A3030 ACCELERATOR
1 /2Pages

Catalog excerpts

A3030 ACCELERATOR-1

A WATER APPLICATION SOLUTIONS FOR CENTER PIVOT IRRIGATION ACCELERA TOR ULTIMATE VERSATILITY AT 10 PSI Designed as a hybrid of Rotator® and Spinner technology, the A3030 Accelerator increases rotation speed through the nozzle range. This allows for optimal throw and droplet characteristics. The Gold Plate for the A3030 Accelerator creates a wide throw pattern, providing a lower application rate and longer soak time for better infiltration and reduced runoff. Choose the Maroon Plate for a low stream height and maximum wind-fighting performance. The new Navy A3030 Plate takes this low pressure Rotator technology to an up-top application. RELATIVE SPRINKLER THROW DIAMETER @ 10 PSI #32 NOZZLE PIVOT ACCELERATOR ALSO AVAILABLE IN THE TRADITIONAL 3000 SERIES CONFIGURATION. FEATURES & BENEFITS LOW PRESSURE PERFORMER. WIDER THROW THAN SPRAYS. Lower application rate. Longer soak time. Reduced runoff. RELIABLE. Field-proven since 2002. ECONOMIC. A great improvement over sprays and at a good price. IN-CANOPY PERFORMER. WIND-FIGHTING STREAMS. Stronger streams penetrate ROTATING STREAMS. through the foliage better Hybrid sprinkler between than sprays. Rotator® and Spinner NO VIBRATION. optimizes throw and droplet characteristics. NO SPECIAL MOUNTING REQUIREMENTS. Retrofits AVAILABLE WITH THE TRADITIONAL 3TN NOZZLE/3000 SERIES BODY. on any drop tube. MAINTAIN A LOWER INVENTORY. Same nozzle system as all Nelson 3030 Series Sprinklers. Same body as the D3030 Sprayhead. SPRINKLER CONVERTER Irrigate, spray, bubble & chemigate — all with one sprinkler. Nelson’s new sprinkler converter allows you to configure different cap and plate options with the A3030 Accelerator body. Tel: +1 509.525.7660 / Fax: +1 509.525.7907 / nelsonirrigation.com / info@nelsonirrigation.

 Open the catalog to page 1
A3030 ACCELERATOR-2

A3030 ACCELERATOR PERFORMANCE* PRESSURE RANGE* MAROON PLATE FOR DROP TUBE APPLICATIONS GOLD PLATE NOZZLE SIZE NOZZLE SIZE FOR DROP TUBE APPLICATIONS NAVY PLATE THROW DIAMETER DATA** @ 10 PSI (no wind tests) MOUNTING HEIGHT THROW DIAMETER for lower pressures COVERAGE @ 10 PSI #36 NOZZLE * Careful selection of pressure and sprinkler configuration must be taken into account to optimize droplet size. ** Throw Distance Varies with Pressure, Nozzle Size, Mounting Height and Hydraulic Conditions. ATTACH THE NEW NELSON SPRINKLER CONVERTER TO THE A3030 CAP & PLATE ASSEMBLY AND CHOOSE FROM A VARIETY OF...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.