D10 SPRAY THE D10 SPRAY. WHEN UNIFORMITY AND RELIABILITY REALLY COUNT. Gentle rain-like irrigation for greenhouses, nurseries, container yards, and orchards. Durable and Reliable No Moving Parts Easy-clean, Quick-change Nozzles MINI REGULATOR DRAIN CHECK OPTION (MRDC) Provides even flow over a range of inlet pressures Solves dripping & drainage problems Improves uniformity and saves water 4 Pressure Options: 20, 30, 35, 40, 45 & 50 PSI SAVE TIME, MONEY, & LABOR Three Connection Options: 1. Glue directly onto a PVC riser. 2. Thread onto an existing system. 3. Connect FT5 Feedtube Assembly directly into polyethylene pipe. Outlet Male Acme directly connects to the D10 Spray Plate Nozzle MRDC Inlet 1/2 FNPT or Female Acme for direct connection to PVC or Threaded Adapters Threaded Adapter Male Acme x MNPT #9465 3/8 #9316 1/2 #9466 3/4 Male Acme x PVC Slip #10060-001 1/2 #10060-002 3/4 Upright Mount 24 (.61 meters) Above Crop Nozzle Inverted Mount 60 (1.52 meters) Above Crop Warning: To avoid very poor uniformity the distance between D10 Sprays should be no more than 1 foot (0.4 meters) less than the radius of throw. Nelson Irrigation Corporation 848 Airport Rd. Walla Walla, WA 99362-2271 USA Tel: 509.525.7660 Fax: 509.525.7907 [email protected] Web site: www.nelsonir

FLOW IN GPM Nozzle Size D10 SPRAY PERFORMANCE PSI at Nozzle Nozzle Color Warranty and Disclaimer The Nelson D10 Sprinkler and Mini Regulator Drain Check are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the products were designed and under normal use and service. The manufacturer assumes no responsibility for installation, removal or unauthorized repair of defective parts. The manufacturers liability under this warranty is limited solely to replacement or repair of defective parts and the...