Gooseneck, Geeseneck & 125 Drop Connections for Pivots
1 / 2Pages

Catalog excerpts

Gooseneck, Geeseneck & 125 Drop Connections for Pivots - 1

G WATER APPLICATION SOLUTIONS FOR CENTER PIVOT IRRIGATION DROP CONNECTIONS MNPT HOSE BARB OR MNPT HOSE BARB OR MNPT GOOSENECK 12375-001 MNPT; 12375-002 BARB HOSE BARB OR MNPT NEW! GEESENECK 13520-001 MNPT; 13520-002 BARB FROM PIVOT POINT TO END GUN - THE NELSON PACKAGE IS NOW EVEN MORE COMPLETE! CHOOSE FROM 6 MODELS OF DROP CONNECTIONS. SUPERIOR FLOW CAPACITY SAVES ENERGY Spinweld technology allows for larger and more efficient inside diameters. 180° goosenecks have less than half the friction loss of comparable products (1 psi {0.07 bar} of friction loss @ 22 gpm {83 lpm}). DURABLE AND CORROSION-RESISTANT PLASTIC Lower cost than traditional metal goosenecks. Will not rust over time, therefore prevents nozzle plugging. Can handle intense tension force. 3/4" MNPT INLET Eliminates extra fittings and provides easier and more reliable installation into span pipe. INSTALLATION NOTES: • If adding sealant, use only Teflon tape or pipe lubricants safe for plastics. • When used on semi-rigid or rigid drops, limit drop length to 96 inches (2.4 m) AND one foot (0.31 m) below trussing in span center. • For ease of installation, retrofit packages may require chasing coupler threads with a tap.

Open the catalog to page 1
Gooseneck, Geeseneck & 125 Drop Connections for Pivots - 2

WARRANTY AND DISCLAIMER: Nelson pivot sprinklers and accessories are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the products were designed and under normal use and service. The manufacturer assumes no responsibility for installation, removal or unauthorized repair of defective parts. The manufacturer’s liability under this warranty is limited solely to replacement or repair of defective parts and the manufacturer will not be liable for any crop or other consequential damages...

Open the catalog to page 2

All Nelson Irrigation Corporation catalogs and technical brochures

  1. PART-CIRCLE

    4 Pages

  2. TRASHBUSTER

    2 Pages

  3. S10 SPINNER

    2 Pages

  4. D10 SPRAY

    2 Pages

  5. NELSON VALVES

    16 Pages

  6. R55VT

    2 Pages

  7. Irricad Pro

    4 Pages

  8. MP Rotator

    8 Pages

  9. TWIG

    4 Pages

  10. P85AS

    2 Pages

  11. Regulation

    2 Pages

  12. R 2000

    8 Pages

  13. R5 Rotator

    4 Pages

  14. Series 3030

    2 Pages

  15. Orbitor

    2 Pages