R10 & R10 Turbo
8Pages

{{requestButtons}}

Catalog excerpts

R10 & R10 Turbo - 1

The R10 and R10 Turbo are part of the Nelson Rotator® family of sprinklers.

Open the catalog to page 1
R10 & R10 Turbo - 2

agricultural sprinkler matches the dependability an Ultra Reliable Low-Volume Sprinklers Filling the need for small, low-volume sprinklers that perform reliably in the mid-range between micro and a regular size sprinkler, Nelson R10 and R10 Turbo (R10T) Rotators are right on target. Incorporating the same proven, patented drive principle and advanced sprinkler technology used in other Nelson Rotators, the R10 and R10T are making their mark in a wide variety of orchard and field irrigation applications. R10 & R10 Turbo Components Rotor Plate R10 or R10T Rotator® Body Threaded Version A...

Open the catalog to page 2
R10 & R10 Turbo - 3

CROP APPLICATIONS Overhead cooling for tree crops. Under canopy irrigation for tree crops. For irrigation of field crops. The R10T Rotator® is used as part of a portable irrigation system that utilizes polyethylene pipe for laterals in combination with the Nelson FT5 feedtube assembly.

Open the catalog to page 3
R10 & R10 Turbo - 4

R 10 NOZZLE OPTIONS AND FLOW REGULATION 10FC with high pressure Nelson 10FC Flow Control Nozzle The 10FC nozzles illustrated above are operating at the same flow. As pressure increases, the flexible flow washers reduce the orifice opening size and emit a constant flow over a wide range of pressure. They assure uniform application of water throughout your crop. 10FC nozzle and 2TN nozzle flow rates with changes in pressure Why use Flow Control Nozzles? · constant flow over a range of pressure increases field uniformity low cost, high value Flow control nozzles (10FC) are an excellent low...

Open the catalog to page 4
R10 & R10 Turbo - 5

R10 Plate/Nozzle Options and Flow Performance in GPM and LPH Plate Series Plate Options Within the recommended pressure range of 25-50 PSI (1.75-3.25 BAR), the .35 10 FC flow control nozzle is flow regulating within a flow range of no more than 0% greater and 10% less than the nominal flow of .35 GPM (79.5 LPH). Within the recommended pressure range of pressure range of 25-50 PSI (1.75-3.25 BAR), the .5 10 FC flow control nozzle is flow regulating within a flow range of no more than 0% greater and 10% less than the nominal flow of .5 GPM (114 LPH). R10 Turbo Plate/Nozzle Options and Flow...

Open the catalog to page 5
R10 & R10 Turbo - 6

R 10 and R10 TURBO MOUNTING OPTIONS and ACCESSORIES Nelson Rotator® Feedtube Assemblies These versatile stake mounting options feature durable, UV and kink resistant flexible PVC tubing. Fast, simple installation. Easy nozzle cleaning — kink the tubing to stop the flow. Low cost, high value. 5 mm and 10 mm tubing options are available. See the Nelson Rotator® Feedtube Assemblies brochure for further details. FT2 Feedtube #9726-024 6 mm Steel Stake 24” (61 cm) or #10040-018 6 mm Fiberglass Stake 18” (45 cm) or #10040-024 6 mm Fiberglass Stake 24” (61 cm) ½ PVC-5 mm Feedtube R10T, Acme Base...

Open the catalog to page 6
R10 & R10 Turbo - 7

10 mm Feedtube Assemblies The ¾ PVC-10, FT4 and FT5 Feedtube Assemblies all utilize 10 mm feedtube and connect R10 & R10 Turbo Rotators to polyethylene laterals. The ¾ PVC-10 is a heavy-duty option that prevents damage caused by equipment, workers and animals chewing on tubing. The FT4 is for permanent connection while the FT5 has a quick connect and disconnect feature for portable lateral systems. Both assemblies are mounted with steel stakes. With the addition of collar #9195 to FT4 or FT5, they can be converted to mount on a 3/4” PVC stake. ¾ PVC-10 mm Feedtube R10T, Acme Base #11429 PVC...

Open the catalog to page 7
R10 & R10 Turbo - 8

NELSON OVERLAP SOFTWARE Overlap Color Contour Output (details of this typical example) Product: R10, P2 9° Red Plate, #50 2TN Nozzle Spacing: 28 x 16' (8.5 x 4.9 m) triangular, Trees 7 x 16' (2.1 x 4.9 m) Precipitation Rate: .10 in./hour (2.5 mm/hour) Uniformity is calculated for specific areas defined as Field, Strips, and Trees. Field includes everything, Strips are bands (for this example 6' (1.8 m) wide) that encompass the trees, and trees are circles (6' (1.8 m) in diameter for this example) that represent theoretical root zones. Nelson Overlap Computer Software Package (#3001)...

Open the catalog to page 8

All Nelson Irrigation Corporation catalogs and technical brochures

  1. PART-CIRCLE

    4 Pages

  2. TRASHBUSTER

    2 Pages

  3. S10 SPINNER

    2 Pages

  4. D10 SPRAY

    2 Pages

  5. NELSON VALVES

    16 Pages

  6. R55VT

    2 Pages

  7. Irricad Pro

    4 Pages

  8. MP Rotator

    8 Pages

  9. TWIG

    4 Pages

  10. P85AS

    2 Pages

  11. Regulation

    2 Pages

  12. R 2000

    8 Pages

  13. R5 Rotator

    4 Pages

  14. Series 3030

    2 Pages

  15. Orbitor

    2 Pages