video corpo

R2000 Windfighter
1 /4Pages

R2000 Windfighter

R2000 Windfighter
1 /4Pages

Catalog excerpts

R2000 Windfighter-1

The R2000WF is part of the Nelson Rotator ® family of sprinklers.

 Open the catalog to page 1
R2000 Windfighter-2

agricultural sprinkler matches the uniformity, dep The R2000WF Rotator® consistently delivers higher uniformity than impact sprinklers. It forms a tight wind-penetrating stream that is systematically broken up by a diffuser, filling in the water pattern. Its sweeping action gently distributes water droplets to the ground preventing soil compaction. Wind-Fighting Stream No Riser Vibration The drive arm of an impact sprinkler directs a harsh "splash down” that seals the soil and causes crop damage directly around the sprinkler, while barren "wind skip” areas develop where the distorted stream doesn't...

 Open the catalog to page 2
R2000 Windfighter-3

pendability and durability of the R2000 Windfighter. HIGH UNIFORMITY IN THE FIELD Solid Set. Aluminum pipe, PVC, or Polyethylene. Permanent Set. Overhead irrigation for cooling. Wheel Line. Portable Systems. The R2000WF in combination with the Mini Regulator Drain Check provides the ideal germination sprinkler for PVC or polyethylene systems. Superb uniformity is achieved with low application rates while drain-down problems are virtually eliminated. A tool that increases profits. The R2000WF has lower maintenance costs than other sprinklers because it’s easy to repair, easy to clean, and proven...

 Open the catalog to page 3
R2000 Windfighter-4

*All plate options are high angle. The performance data in this section has been recorded under ideal test conditions and may be adversely affected by poor hydraulic entrance conditions, slope, riser tilt, temperature, wind or other factors. Always be sure to use the nozzle size that is recommended for the plate. Always operate within the recommended pressure range. Only the nozzle and plate combinations grouped together in the above charts are recommended. Review motor/plate/nozzle combinations on page 2. 1/2" (1.25cm) FNPT or Female Acme Inlet for direct connection to PVC or threaded adapters...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.