WATER APPLICATION SOLUTIONS FOR CENTER PIVOT IRRIGATION NO OTHER END OF PIVOT SPRINKLER WORKS IN THE LOW PRESSURE RANGE OF 15-60 PSI (1-4 BAR) AND PROVIDES UP TO 10 ADDITIONAL IRRIGATED ACRES (ON A 1/4 MILE PIVOT). The new Nelson R55VT uses a patented variable torque speed governing system that allows the plate to maintain a constant rotation speed across a broad range of nozzle sizes and pressures. This new design also incorporates snap-fit nozzles, eliminating the need for a retaining pin. UPRIGHT MOUNT (BLUE PLATE) Verify nozzle is secure: check lip in front check notch in back Poor entrance conditions diminish performance. Operating Pressure must be 15-60 psi (1-4 bar) 6” Drain required INVERTED MOUNT (GREEN PLATE) Operating Pressure must be 15-60 psi (1-4 bar) Poor entrance conditions diminish performance. R55i VT The inverted R55i VT, with a specifically engineered green plate, is easier to install and some say it’s effective in helping manage debris that collects at the end of the system.

12885 R55VT Plate/ Body Assy 12886 R55i VT Plate/ Body Assy Nozzle #52 Purple #56 White #60 Red #65 Orange #70 Yellow #80 Green #90 Blue* R55VT PERFORMANCE (U.S. UNITS) #52 Purple Nozzle R55VT PERFORMANCE (METRIC UNITS) #52 Purple Nozzle R55i VT PERFORMANCE (U.S. UNITS) #52 Purple Nozzle #65 Orange Nozzle Flow (gpm) #80 Green Nozzle Flow (gpm) R55i VT PERFORMANCE (METRIC UNITS) #52 Purple Nozzle #56 White Nozzle #60 Red Nozzle #65 Orange Nozzle #70 Yellow Nozzle #80 Green Nozzle Pressure (bar) Flow (m3/hr) Radius (m) Flow (m3/hr) Radius (m) Flow (m3/hr) Radius (m) Flow (m3/hr) Radius (m) Flow...