THINWALL DRIPLINE REAL PRESSURE COMPENSATING TECHNOLOGY TO IRRIGATE ROW CROPS WITH UNDULATING TERRAIN INJECTION MOLDED DRIPPERS Made of high quality polyethylene material and welded into a wall of seamless tubing - prevents dripper damage during installation and distortion of the flow path even as the tubing stretches and expands. ANTI-SIPHON MECHANISM OPTION Seals the dripper outlet at system shut-down, blocking debris from entering the dripline after irrigation. LOOK FOR THE ORANGE STRIPES DRIPNET PC SERIES 15 mil and 18 mil - multi-seasonal, subsurface use 25 mil - where higher pressures are needed to overcome severe undulation in large fields with long runs 990 Series - an additional internal diameter choice to meet challenging runs and improve emission uniformity HIGH QUALITY POLYETHYLENE TUBING LARGEST DRIPPER INLET FILTER AREA Prevents penetration of dirt particles into the dripper. CHEMICAL RESISTANT MOLDED SILICON SELFFLUSHING, SELF-ADJUSTING DIAPHRAGM Movement maintains a constant pressure differential within the water passage resulting in a uniform flow rate under a wide pressure range and varying water quality. INDUSTRY’S WIDEST FLOW PATH Allows particles through short flow path. TECHNOLOGY Improves dripper performance with expanded tooth pattern maximizing flow path area allowing debris to pass easily through the dripper. SPECIFICATIONS Inside diameter: 0.636”, 0.875”, 0.990” Nominal flow rates (GPH): 0.16, 0.26, 0.32, 0.42 Common spacings: 8”, 12”, 18”, 24”, 30 Regulating pressure range: 6-36 psi (maximum operating pressure is determined by tubing I.D. and wall thickness) Recommended filtration: 120 mesh PRODUCT ADVANTAGES Pressure compensating dripline delivers precise flows anywhere in the field. Undulating terrain, large fields with long rows (up to 50% longer, when compared to turbulent drip tape) receive exact amounts of water - from the first to the last dripper in the row. Wide regulation pressure range from 6 to 36 psi. Match the soil’s infiltration rates with a wide range of flows, tubing size and dripper spacing. Water and nutrients are available to a lar

MAXIMUM PRESSURE RANGES 636 SERIES 15 MIL 636 SERIES 25 MIL 875 SERIES 15 MIL 875 SERIES 25 MIL 990 SERIES 18 MIL 990 SERIES 25 MIL PACKAGING DATA 636 SERIES 15 MIL NON ANTI-SIPHON 636 SERIES 15 MIL WITH ANTI-SIPHON 636 SERIES 25 MIL NON ANTI-SIPHON 636 SERIES 25 MIL WITH ANTI-SIPHON 875 SERIES 15 MIL NON ANTI-SIPHON 875 SERIES 15 MIL WITH ANTI-SIPHON WITH ANTI-SIPHON CALL CALL 12 CALL WITH ANTI-SIPHON CALL CALL 12 CALL PACKAGING DATA: Uses 22.5" x 13.5" cardboard reels with 1 5/8" hub hole. Weights are approximate. Pallet weight includes 45 lbs. for weight of pallet. Reels per pallet and pallet...

NOTE: Information contained in these Length of Run Charts represents single lateral uniformities only. For further detail regarding block and system uniformity, please contact your Irrigation Design Professional. DRIPPER INLET PRESSURE (psi) DRIPPER INLET PRESSURE (psi)

NOTE: Information contained in these Length of Run Charts represents single lateral uniformities only. For further detail regarding block and system uniformity, please contact your Irrigation Design Professional. DRIPNET PC 875 SERIES - 15 MIL LENGTH OF RUN @ 0% SLOPE - 96.8% EU 0.16 GPH DRIPPER DRIPNET PC 875 SERIES - 25 MIL LENGTH OF RUN @ 0% SLOPE - 96.8% EU 0.16 GPH DRIPPER DRIPPER INLET PRESSURE (psi) SPACING 9 14 19 24 29 DRIPNET PC 990 SERIES - 18 MIL LENGTH OF RUN @ 0% SLOPE - 96.8% EU 0.16 GPH DRIPPER DRIPNET PC 990 SERIES - 25 MIL LENGTH OF RUN @ 0% SLOPE - 96.8% EU 0.16 GPH DRIPPER...