GROW MORE WfTH LESS REVOLUTIONARY TURBUNEXT™ TECHNOLOGY ENSURES SUPERIOR CLOG RESISTANCE AND UNIFORM YIELDS WITH ULTRA LOW-FLOW RATES Typhoon plus _LOOKFOR THE ORANGE STRIPES A GROW MORE WITH LESS

Netafim continues to address the changing needs of our growers and we continue to set new standards in clog resistance and enhanced performance with the all new TyphoonTM Plus thinwall driplines. A high quality dripline for multi-season use that can be used for surface or subsurface (SDI) applications. Our newest innovation - TurbuNextTM Technology - offers a labyrinth that provides lower flow rates with a large filtration area while maximizing the internal turbulence. All this results in the durability and clog resistance growers need in challenging water conditions. Typhoon Plus’ durability...

Typhoon Plus is the ideal solution for multi-season crops such as processing tomatoes, fruits, vegetables, corn, soybeans and many others. HIGHER AND MORE UNIFORM YIELD SEASON AFTER SEASON With Netafim's proven dripper technology which provides the ultimate in clog resistance, you can be confident that your system is operating accurately and efficiently - day after day, year after year. LOWER FLOW RATE AND LONGER LATERALS The ultra-low flow rate enables a grower to install longer row lengths reducing the amount and cost for additional irrigation equipment such as submains, fittings and accessories....

TECHNICAL INFORMATIONINDUSTRY'S WIDEST FLOW PATH Wider cross-section allows large particles through flow path. FLOW RATE VS. PRESSURE TYPHOON PLUS SERIES WIDTH OF CORE CORE SHAFT HOLE 1 5/8

REEL DIAMETER: 22 1/2" for all Sizes CORE SHAFT HOLE: 1 5/8" for all Sizes WIDTH OF CORE: 4 3/4" for all Sizes Weights are approximate. When calculating pallet weight, include 45 lbs. for the weight of pallet. Reels per pallet are for standard reel lengths only. Length of reels and reels per pallet may change for custom reel lengths. ALL TYPHOON PLUS SERIES FILTRATION REQUIREMENT DRIPPER FLOW CODE DRIPPER FLOW PATH DIMENSIONS DRIPPER FLOW RATE DRIPPER FLOW RATE DRIPPER FLOW RATE

ORDERING INFORMATION INSIDE DIAMETER Inside Diameter Wall Thickness Code Dripper Spacing Code ORDERING EXAMPLE To create the Model Number, select the appropriate codes from the options listed in the charts and insert them into the sequence. For the example above: Typhoon Plus with Flap, .638" Inside Diameter, 8 mil Wall Thickness, 0.16 GPH Flow Rate, 12" Dripper Spacing • Model Number: TPF63808.16-12 Notes: Flow rate based on 10 psi inlet pressure Call Netafim Customer Service for dripper spacings not listed NOTE: Information contained in these Length of Run Charts represents single lateral uniformities...

NOTE: Information contained in these Length of Run Charts represents single lateral uniformities only. For further detail regarding block and system uniformity, please contact your Irrigation Design Professional. For length of run spacings for Typhoon Plus 1 3/8" Series, please contact Netafim Customer Service. TYPHOON PLUS 990 SERIES LENGTH OF RUN @ 0% SLOPE 0.11 GPH DRIPPER (0.11 @ 10 psi) DRIPPER GPM/100 FT EMISSION UNIFORMITY (EU) SPACING @ 94% EU 94% 92% 90% TYPHOON PLUS 1 1/8" SERIES LENGTH OF RUN @ 0% SLOPE 0.11 GPH DRIPPER (0.11 @ 10 psi) DRIPPER GPM/100 FT EMISSION UNIFORMITY (EU) SPACING...

NETAFIM SYSTEM COMPONENTS To achieve maximum performance and increase the longevity of your Typhoon Plus Thinwall Dripline and the complete irrigation system, include the following high quality Netafim system components. Many factors should be considered when selecting a filter system including: flow rate, quality of incoming and discharged water and the type of dripper - the smaller the flow path, the more critical the required filtration. Netafim offers disc, sand and screen filters to fit all applications. Manufactured from high quality materials, Netafim offers control valves in nylon, pvc,...