BRUSH POLISHERS

BRUSH POLISHERS

Product catalog summary
Overview: The document provides details about brush polishers designed by Niagri Engineering Limited for washing and polishing root vegetables. These machines enhance the appearance and shelf-life of crops like potatoes, carrots, parsnips, red beet, and swede.
Specifications: The brush polishers feature a contra-rotating brush system that ensures thorough cleaning and polishing of awkwardly shaped vegetables. The machine includes a high-pressure pump and water tank, and it is designed for easy use and low maintenance.
Design and Functionality: The bristle configurations are mounted on webs that rotate in a 'banana' fashion, with coarser brushes at the entry and finer brushes at the discharge. Bristles are mounted on extrusions, allowing for replacement of only worn sections. The machine's output and finish quality can be adjusted via variable speed brushes.
Features: Key features include:
  • Output options starting from 8 tons per hour (tph)
  • Low maintenance with heavy-duty drive (no belts or pulleys)
  • Capability to remove minor blemishes, upgrading product quality
  • Good visibility of the product through hinged doors
  • Water recycling and filtration belt options to reduce water consumption
  • Construction options in painted mild steel or 304-grade stainless steel
Additional Information: The machine is equipped with six heavy-duty bearings to minimize maintenance costs. Wastewater can be collected and reused, enhancing sustainability.
See more

Catalog excerpts

BRUSH POLISHERS-1

HARVESTING ▪ HANDLING ▪ GRADING ▪ STORAGE ▪ CLEANING ▪ DESTONING ▪ WASHING ▪ CUTTING ▪ COOLING ▪ STACKING BRUSH POLISHERS SALES ▪ SERVICE ▪ SUPPORT FEATURES  Output options from 8tph  Low maintenance  Heavy duty drive (no belts or pulleys)  Removes minor blemishes, allowing product to be upgraded  Good visibility of product  A total of 6 heavy duty bearings means maintenance costs are minimised  Water recycling & filtration belt options available  Painted mild steel or 304 grade stainless steel construction An effective means for washing and polishing your crops Polishing not only increases the appearance, but also the shelf-life of many tough to clean root vegetables. A carefully configured, contra rotating, brush system ensures even the most awkward shapes get polished. No product loss even when the brushes wear. A high pressure pump and water tank has been incorporated in the machine. Easy to use and a low cost maintenance machine. Bristle configurations are mounted on webs that rotate in a ‘banana’ like fashion with the slightly coarser brushes as the vegetable enters the machine and finer brushes on the discharge. Bristles are mounted onto extrusions so you only replace the worn sections, not the complete belt. Output and the required finish of the product can accurately be determined by the variable speed top brush and bottom brushes. Good visibility of the product is gained by the hinged doors above the machine. Waste water from the machine can be collected through a filtration belt and used upstream if required, reducing water consumption. More washing and processing available. This machine is suitable for the following crops: Niagri Engineering Limited ▪ Cowles Drove ▪ Hockwold ▪ Norfolk ▪ IP26 4JQ ▪ T:01842

 Open the catalog to page 1

All Niagri Engineering catalogs and technical brochures

  1. CLEANWASH 25

    2  Pages

  2. BED FORMERS

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.