HYDRAULIC HOSES TECHNICAL CATALOGUE

Product catalog summary

Overview: The document outlines technical specifications for high-pressure hoses used in industrial applications, particularly with petroleum-based hydraulic fluids. These hoses are designed for high-pressure environments.

General Specifications:

Temperature Range: Most hoses operate between -40°C to 121°C (-40°F to +250°F), with some allowing intermittent use up to +150°C for pressure washers.
Inner Tube: Constructed from oil-resistant synthetic rubber.
Reinforcement: Composed of four or six high tensile steel spirals, varying by hose type and size.
Cover: Made of synthetic rubber with high resistance to abrasion, ozone, and weather. All hoses have MSHA fire resistance approval.

Hose Types and Applications:

Water Blasting Hose: Suitable for very high-pressure water scaling and jetting systems, reinforced with four high tensile steel spirals.
EN856 4SP and 4SH: Designed for very high-pressure applications with petroleum-based hydraulic fluids, differing in pressure ratings and flexibility.
EN856 R12, R13, and R15: Intended for severe high-pressure applications, such as construction equipment and mining. R13 and R15 are tailored for surge or flexing conditions.

Key Parameters:

Maximum Working Pressure (Max W.P.): Ranges from 175 BAR (2530 PSI) to 1000 BAR (14500 PSI), depending on hose type and size.
Minimum Burst Pressure (min B.P.): Generally four times the maximum working pressure, ensuring safety under extreme conditions.
Minimum Bend Radius (min B.R.): Reflects hose flexibility, with smaller values allowing tighter bends.
Weight: Varies by hose size, influencing handling and installation ease.

Performance Testing: All hoses undergo impulse testing over 1,000,000 cycles without leakage, confirming durability and reliability in high-pressure applications.

Catalog excerpts

WORKING PRESSURE [BAR] HOSE SIZE Page MINIMUM BENDING RADIUS [mm] HOSE SIZE Page

Open the catalog to page 3

APPLICABLE SPECS HOSE STRUCTURE WIRE BRAIDED WIRE SPIRALLED

Open the catalog to page 4

EN853 1SN/SAE100 R1AT Low-medium pressure line, including mobile, machine tool and agricultural application, using petroleum or water-based hydraulic fluids TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: One high tensile steel braid WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size EN857 1SC - COMPACT Hose has compact dimensions and tighter bend radius in machinery applications. Low-medium pressure line with installation...

Open the catalog to page 5

EN853 2SN/SAE100 R2AT Medium-high pressure line, including construction, machine tool and agricultural application, using petroleum or water-based hydraulic fluids TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: Two high tensile steel braid WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size EN857 2SC - COMPACT High-pressure service with tight bends for petroleum and water based hydraulic fluids, with excellent impulse performance....

Open the catalog to page 6

1SN PREMIUM – EXCEED EN853 1SN Low-medium pressure line, including mobile, machine tool and agricultural application, using petroleum or water-based hydraulic fluids. Comparing to regular 1SN, it has lighter weight, higher working pressure and half the bending radius. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: One high tensile steel braid SMOOTH COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size 2SN PREMIUM – EXCEED EN853 2SN...

Open the catalog to page 7

EN853 2SN AGRO LINE 2SN hose design specifically for agricultural machinery TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: Two high tensile steel braid WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size SAE 100 R16 Medium-high pressure service with tight bends for petroleum and water based fluids where maximum abrasion resistance is required, with excellent impulse performance and flexibility. TEMPERATURE: -40°C to 100°C...

Open the catalog to page 8

SAE 100 R17 Medium-pressure hydraulic applications, where higher pressure and a more flexible hose is required. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: One high tensile steel braid (DN6-10) Two high tensile steel braids (DN12-25) WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size SAE 100 R5 Low-medium pressure line, general purpose applications. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C...

Open the catalog to page 9

JACK HOSE Very high pressure hydraulic line – 520 to 700 bar. Compact, high pressure, light weight, high abrasion resistance and low change in length for use with petroleum, synthetic or water based fluids in hydraulic system. Mainly used for rescue, safety equipment, bolt tensioning tools and jacking & re-railing equipment. Also, suitable for earthmoving and material handling equipments. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: Two high tensile steel braid SMOOTH COVER: Synthetic rubber with high...

Open the catalog to page 10

PRESSURE WASHER HOSE II For medium pressure cleaning application with hot water. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +150°C for pressure washer only INNER TUBE: synthetic rubber REINFORCEMENT: Two high tensile steel braid SMOOTH COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size WATER BLASTING HOSE Very high pressure hose for water scaling and jetting system TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: synthetic rubber REINFORCEMENT: four high...

Open the catalog to page 11

Impulse tested over 1000000 cycles without leakage Very high-pressure applications used for petroleum based hydraulic fluids. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: four high tensile steel spiral WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size Impulse tested over 1000000 cycles without leakage Very high-pressure applications used for petroleum based hydraulic fluids. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), INNER TUBE: Oil resistant synthetic...

Open the catalog to page 12

Impulse tested over 1000000 cycles without leakage Very high-pressure applications used for petroleum based hydraulic fluids. TEMPERATURE: -40°C to 121°C (-40°F to +250°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: four high tensile steel spiral WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size Impulse tested over 1000000 cycles without leakage Very high-pressure applications subject to surge or flexing such as construction equipment, mining and the high performance industrial market. TEMPERATURE:...

Open the catalog to page 13

Impulse tested over 1000000 cycles without leakage Designed specifically to handle severe high pressure applications where pressure or constant hydrostatic loads are present. TEMPERATURE: -40°C to 121°C (-40°F to +250°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: four high tensile steel spiral (DN19-25) Six high tensile steel spiral (DN31-51) WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size

Open the catalog to page 14

All NUZZO FORTUNATO & C. SAS catalogs and technical brochures

GENERAL CATALOGUE
32 Pages