OMBRAFLEX LIGHT
3Pages

OMBRAFLEX LIGHT Light shading paint for plastic or glass greenhouses • FOR GEOGRAPHICAL AREAS WITH LOW ANNUAL RAIN FALL. • ADJUSTABLE SHADING INTENSITY ACCORDING TO DILUTION RATE. • CAN BE APPLIED ON GLASS OR PLASTIC SCREENS. • ELIMINATES ITSELF OVERTIME. • ULTRA HIGH SOLID CONTENT. product identification Classification according to NF T 36-005 : Family I - category 7ba DESCRIPTION Seasonal waterborne paint with mineral fillers and acrylic copolymer resins, especially designed for shading plastic or glass greenhouses being used by flower and vegetable growers, as well as for skylights in industrial premises. PRODUCT DATA Solid content : By weight : 56,6 ± 2,0 %. Density : 1,53 ± 0,05 kg/dm3. Dry time ( at 23°C and 50 % RH) : To touch : 2 hours. Flash point : Non flammable, waterborne product. Product texture : Paste-like product. Dry film aspect : Matt. QUALITY CONTROL The mentioned characteristics are subject to a factory production control (FPC), realized according to a Quality Management System certified ISO 9001 (2008) and an Environmental Management System certified ISO 14001 (2004). - Do not apply at a temperature below 5°C and at a humidity rate higher than 80%, or with risk of frost. Do not apply when it may rain in the next 12 hours, on frozen or hot substrates above 35 °C, on humid or condensing surfaces. - If the shading process needs to be renewed during the season, make sure of the good adhesion of the existing shading paint film. works New and renovation. DESTINATION Functional maintenance of greenhouses (flower and vegetable growers and so on...). Can also be used for shading industrial skylights or to provide window opacity on construction sites of new buildings. LOCATION Outdoor. WELL PREPARED SUBSTRATES Plastic films (polyethylene, E.V.A or derivates), plastic or glass translucent panels (polycarbonates). - Uniform active shading - Adjustable opacity - Large application periodicity. Can be used in late winter (regions with high sunshine and low rainfalls). - Fast paint film wearing under rain and U.V. actions - Protection against overheating: this protection is beyond the temperature in the shelter (Cf. weather data). This is the result of solar radiation reflection thanks to the paint film (reflectance of the new coating or being renovated at about 30 %). During very hot period, crops should be watered in order to compensate the excessive water evaporation. - Good product burst and uniform spread with a helicopter application. Reduces the number of passes.

(1) Average value which can vary with the limit of 30 % depending on needs and weather conditions. (2)These are guide values (achieved in laboratory) and may vary for measurements realized in situ depending on coverage and dilution applied. (3)Product wear resistance of Ombraflex range is based on an average European climate. Extreme weather conditions can modify the indicated results. SUBSTRATE PREPARATION Substrates must be perfectly clean and dry, free from dust and oily substances, and no residual shading paint should remain, especially when this is the first application of the...

PACKAGING AND COLORS PACK SIZE : 25 kg drum. COLOURS : Delivered in off-white. Do not modify the original color by adding any universal tints. HYGIENE AND SAFETY / HEALTH AND ENVIRONMENT OTHER INFORMATION Standard for use : NF UTD 59.1, for the use on glazed buildings. Maintenance : with the original product. Recommendations concerning paint products storage conditions after opening in order to limit the residues formation : clean the lid and the inside sides of each packaging, seal it hermetically. Storage : 12 months in the former 25 Kg drum, not opened, store away from frost, heat and...