OMBRAFLEX STANDARD
3Pages

{{requestButtons}}

Catalog excerpts

OMBRAFLEX STANDARD - 1

OMBRAFLEX STANDARD Standard shading paint for plastic or glass agricultural greenhouses, as well as urban or industrial building windows. • ADJUSTABLE SHADING INTENSITY ACCORDING TO DILUTION RATE. • CAN BE APPLIED ON GLASS OR PLASTIC SCREENS. • ELIMINATES ITSELF OVER TIME. • BARRIER AGAINST INFRARED AND U.V RAYS. • ULTRA HIGH SOLID CONTENT. PRODUCT IDENTIFICATION Classification according to NF T 36-005 : Family I - category 7b2 DESCRIPTION Seasonal waterborne paint with mineral fillers and acrylic copolymer resins, especially designed for shading plastic or glass greenhouses being used by flower and vegetable growers, as well as for skylights in industrial premises. PRODUCT DATA Solid content : By weight : 62.1 ± 2,0 %. Density : 1,62 ± 0,05 kg/dm3. Dry time ( at 23°C and 50 % RH) : To touch : 2 hours. Flash point : Non flammable, waterborne product. Product texture : Paste-like product. Dry film aspect : Matt. QUALITY CONTROL The mentioned characteristics are subject to a factory production control (FPC), realized according to a Quality Management System certified ISO 9001 (2008) and an Environmental Management System certified ISO 14001 (2004). - Do not apply at a temperature below 5°C and at a humidity rate higher than 80%, or with risk of frost. Do not apply when it may rain in the next 12 hours, on frozen or hot substrates above 35 °C, on humid or condensing surfaces. - If the shading process needs to be renewed during the season, make sure of the good adhesion of the existing shading paint film. WORKS New and renovation. DESTINATION Functional maintenance of greenhouses (flower and vegetable growers and so on...). Can also be used for shading industrial skylights or to provide window opacity on construction sites of new buildings. LOCATION Outdoor. WELL PREPARED SUBSTRATES Plastic films (polyethylene, E.V.A or derivates), plastic or glass translucent panels (polycarbonates). - Uniform active shading - Adjustable opacity - Large application periodicity. - Gradual paint film wearing under rain and U.V. actions - Protection against overheating: this protection is beyond the temperature in the shelter (Cf. weather data). This is the result of solar radiation reflection thanks to the paint film (reflectance of the new coating or being renovated at about 30 %). During very hot period, crops should be watered in order to compensate the excessive water evaporation. - Good product burst and uniform spread with a helicopter application. Reduces the number of passes.

Open the catalog to page 1
OMBRAFLEX STANDARD - 2

Shading intensity : OMBRAFLEX STANDARD provides a temporary protection, which fades after a few months under the sun and rain actions. After heavy rain or a period of strong sunlight, the shading paint can get prematurely eliminated. In that case, it will be necessary to apply a new coat. In case of incomplete disappearance of the shading paint film at the end of the season, (low rain fall or late application), the coat residue will be removed either by mechanical cleaning (with a brush and clear water) and/or with OMBRASTOP GEL cleaning solution (See technical data sheet for the removal...

Open the catalog to page 2
OMBRAFLEX STANDARD - 3

PACKAGING AND COLOURS PACK SIZE : 25 kg drum and 2,5 L can. COLOURS : Delivered in off-white. Do not modify the original color by adding any universal tints. HYGIENE AND SAFETY / HEALTH AND ENVIRONMENT Material safety datasheet : Available on www.quickfds.fr. OTHER INFORMATION Standard for use : NF UTD 59.1, for the use on glazed buildings. Maintenance : with the original product. Recommendations concerning paint products storage conditions after opening in order to limit the residues formation : clean the lid and the inside sides of each packaging, seal it hermetically. Storage : 12 months...

Open the catalog to page 3

All Ombraflex catalogs and technical brochures

  1. SHADING PAINTS

    18 Pages