GF 20 - GF 40

Product catalog summary

Overview: The document describes the GF20 and GF40 mobile filtration units designed for removing solid contaminants from mineral-based oils. These units are suitable for filling, emptying, and purifying systems in operation. They utilize Spin-on filters with filtration degrees ranging from 250 µm to 3 µm.

Specifications for GF20:

Electrical Motor: 0.5 kW, 4 poles, 380V
Flow Rate: 10 L/min
Check Valve: None
Pressure Switch: None
Suction Pipe Size: 3/4” x 2000 mm
Pressure Pipe Size: 3/4” x 2000 mm
Dimensions (H x L x W): 260 x 235 x 510 mm
Weight: 10 kg
Replacement Filter Elements: CS05 / CS06

Specifications for GF40:

Electrical Motor: 0.75 kW, 4 poles, 220V
Flow Rate: 38 L/min
Check Valve: 5 bar
Pressure Switch: 4 bar
Suction Pipe Size: 1” x 2500 mm
Pressure Pipe Size: 3/4” x 2500 mm
Dimensions (H x L x W): 960 x 580 x 800 mm
Weight: 25 kg
Replacement Filter Elements: CS10 / CS15

Additional Notes: Filter elements from the CS series must be ordered separately, as referenced in the filters catalogue section 08.

Catalog excerpts

GF 20 - GF 40 GRUPPO MOBILE DI FILTRAZIONE MOBILE FILTRATION UNIT

Open the catalog to page 1

Gruppo mobile di filtrazione Mobile filtration unit Mobile filtration units GF 20 and GF 40 are self container portable units, designed to enable hydraulic fluids to be filtered in many installations or applications. They can be used for filling or emptying systems or as an offline filtering system. Units use Spin-on filters; a complete range of replacement canisters is available to allow almost all levels of cleanliness to be achieved. Filtration degrees from 250 µm to 3 µm are available. I gruppi mobili di filtrazione GF 20 e GF 40 sono il sistema di rimozione del contaminante solido, presente...

Open the catalog to page 2

GF 20 - GF 40

GF 20 - GF 40

Catalog excerpts

All OMT S.p.A. catalogs and technical brochures