*myagriexpo

Catalogs
Onset
T-VER-971BP-200

T-VER-971BP-200

Product catalog summary

Overview: The T-VER-971BP-200 is a Split-Core Bi-Polar DC Transducer Sensor designed to measure up to 200 Amps of DC current in both directions, making it ideal for applications such as Solar PV systems.

Specifications:

Measurement Range: +/- 2 to +/- 200 Amps (adjustable span)
Accuracy: +/- 0.5 A below 100A span; +/- 0.5% full scale above 100A span
Power Supply: 12 - 24 VDC (minimum 15 VDC for currents > 120 A)
Isolation: 600 VAC rms
Operating Temperature: -30 to 60°C (-22 to 140°F)
Humidity Range: 10 - 90% non-condensing
Response Time: 2 seconds
Output: 4 - 20mA bi-polar
Dimensions: 3.1x2.8x1.4 inches (79x70x36 mm)
Weight: 5.25 oz
Sensor Opening: 1.1x0.9 inches (28x23 mm)

Installation and Configuration: The sensor requires specific configurations depending on the data logger used. For the U30 system, an analog port selection is needed. The H22-001 data logger requires an S-FS-CVIA, while the U12 data logger needs a 4-20mA input cable and external power via an AC adapter. The RX3000 system requires an analog module (RXMOD-A1).

Key Advantages:

Measures current flow in both directions
Adjustable span range
Compact size with split-core for easy installation

LED Indications: The sensor uses LED signals to indicate status: single green blink for normal, double green for over span, red and green for over limit, and solid red for overload.

Certifications: CE, UL

Contact Information: For sales inquiries, email [email protected] or call 1-800-564-4377. For technical support, visit www.onsetcomp.com/support/contact or call 1-877-564-4377.

Catalog excerpts

Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions. Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1). When configuring this with an RX3000 system, it requires a analog module (RXMOD-A1). Note: For measurements larger than 120A the device must be powered by a minimum of 15V to maintain expected accuracy. View Veris manual for T-VER-971BP-200 Supported Measurements: DC Current Key Advantages: • Measures current flow in both directions which is especially beneficial for Solar PV applications. • Adjustable span range • Small size, split-core for ease of installation

Open the catalog to page 1

Sales (8am to 5pm ET, Monday through Friday) ► Email [email protected] Call 1-508-759-9500 In U.S. toll free 1-800-564-4377 ► Fax 1-508-759-9100 Technical Support (8am to 8pm ET, Monday through Friday) ► Contact Product Support www.onsetcomp.com/support/contact Call 1-508-759-9500 In U.S. toll free 1-877-564-4377 Onset Computer Corporation 470 MacArthur Boulevard Bourne, MA 02532 Copyright© 2019 Onset Computer Corporation. All rights reserved. Onset, HOBO, HOBOware are registered trademarks of Onset Computer Corporation. Other products and brand names may be trademarks or registered trademarks...

Open the catalog to page 2

All Onset catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list